BYM3210_MI4822 Introduction

A few days ago, Vishay Intertechnology, Inc. announced that it has expanded its TNPU e3 series of automotive-grade high-precision thin-film flat chip resistors with new devices with a temperature coefficient (TCR) as low as 2 ppm/K, in 0603, 0805 and 1206 form factors.

The MOS tube is a voltage-driven device. As long as an appropriate voltage is applied between the gate G and the source S, the conduction path between the source S and D will be formed. As the switch tube of the driving part, the main focus of the MOS tube is the withstand voltage, current withstand value and switching speed.

BYM3210_MI4822

SSM9926EM-A

BYN41020A BYM41019A BYM41063 BYM429 BYN4286 BYT4222 BYN4224 BYC4213 BYM4225.

. The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type.

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

Power MOSFETs are generally rarely used in P-channel. Since the mobility of holes is lower than that of electrons, the on-resistance of P-channel transistors is larger than that of N-channel transistors for the same channel size. . According to the two points of the conductive channel and the process of channel formation, MOS tubes can be divided into: P-channel enhancement MOS tubes, P-channel depletion MOS tubes, N-channel enhancement MOS tubes and N-channel depletion MOS tubes . Figure four types of MOSFETs and their graphical symbols.

BYM3210_MI4822

FDS6982S-NL

. The characteristics of a MOSFET can be characterized by a transfer characteristic curve and a drain output characteristic curve. Figure 3 shows the handling characteristics of a certain FET. The transfer characteristic refers to the relationship curve between the gate voltage UGS and the corresponding drain current ID when the voltage UDS between the drain and the source is at a certain fixed value.

BYP31036 BYD31010A BYD31024A BYP31017 BYS31018 BYF3104 BYH3108 BYF3109 BYM31032 BYN31333A .

Another technique is to intermittently improve the structure of the MOSFET and use a straight V-groove structure. In order to avoid the problems of too small current-carrying capacity and large on-resistance of MOSFET, two techniques are generally used in high-power MOSFETs. One is to connect millions of low-power MOSFET unit cells in parallel to improve the current-carrying capacity of MOSFET. . FIG. 3 is a cross-sectional view of the structure of a V-channel MOSFET.

BYN31028Z BYN31024A BYG31013A BYN31095 BYJ31040 BYM31013A BYH31015-X BYH31015 BYS31030 BYF31040

BYM3210_MI4822

NCE25TD135LT NCE15TD135LT NCE15TD120LP NCE15TD135LP NCE25TD120LP.

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information