BYM3312_SI4214DDY-T1-E3 Introduction

Xinjie, behind this FET NCE80H12, utilizes its own technical advantages to work closely with 8-inch wafer foundries, packaging and testing foundries, and has a complete quality management system to ensure continuous product quality and stable supply.

In addition to the above-mentioned NCE80H12 suitable for electric vehicle controllers, Nanshan Electronics also provides Fenghua resistance-capacitance sense, long-crystal MOS transistors, Epson active and passive crystal oscillators, etc.

BYM3312_SI4214DDY-T1-E3

BSO307N

NCE30H11K NCE3402B NCE30H10AK NCE2304 NCE3404.

However, in terms of structure, there is a big difference between them. In order to better understand the mechanism of power MOSFET, we must first recall the mechanism of low-power FET. . The following describes the principle of the MOS transistor with the structure of an N-channel enhancement type low-power MOSFET. Working principle of power MOS tube Power MOS tube is developed from low-power MOS tube.

BYS3105 BYP3105 BYJ31020A BYH31012A BYJ31012A BYP3104 BYF31010A BYP31013A BYS31010A BYH31055 .

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

BYM3312_SI4214DDY-T1-E3

SQ4942EY-T1-GE3

For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself. .

BYM4610 BYM4640 BYM4875 BYM81080 BYM81095 BYM826 BYM8311 BYM8315 BYH8415 BYM8415.

When the low UDS separate pinch off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). Growth slows as the conduction channel approaches pinch off. Figure 1. Drain output characteristics of MOS transistors The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current region. Variable resistance region (UDS In this region, ID increases linearly as UDS increases.

Another technique is to intermittently improve the structure of the MOSFET and use a straight V-groove structure. In order to avoid the problems of too small current-carrying capacity and large on-resistance of MOSFET, two techniques are generally used in high-power MOSFETs. One is to connect millions of low-power MOSFET unit cells in parallel to improve the current-carrying capacity of MOSFET. . FIG. 3 is a cross-sectional view of the structure of a V-channel MOSFET.

BYM3312_SI4214DDY-T1-E3

NCE2302D NCE2302F NCE1012E NCE2302B NCE2302.

MOS tube NCE3401 is a -30V drain-source voltage, 4.2A current, P-channel MOS tube in SOT-23 package. .

relevant information