BYN3232_P07D03LVG Introduction

The resistance of this current path is called the internal resistance of the MOS tube, that is, the on-resistance. The size of this internal resistance basically determines how much on-current the MOS tube chip can withstand (of course, it is related to other factors, such as thermal resistance). The smaller the internal resistance, the larger the current (because the heat is small).

When naming the company, the founders incorporated their nostalgia for the past and expectations for the future. A simple name with many untold stories behind it... . There are many well-known brands in the electronics industry, each brand is like a person's name, and its origin and naming have its own unique style. Their success today is due to the founders.

BYN3232_P07D03LVG

BYS36543A

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. . For these two enhanced MOS tubes, NMOS is more commonly used.

BYP31538 BYP31510 BYP31575 BYH31574 BYD31523A BYH31532 BYM31580 BYH31519 BYS31535 BYM31545 .

BYS31511 BYH32025A BYS32026A BYP32027A BYF32028A BYF32018A BYD32011Z BYF32090 BYJ32056 BYP32011A

BYC4322 BYM4310 BYM4322 BYM4316 BYC4312 BYM438 BYS441 BYN4458 BYE4625Z BYM4612 .

BYN3232_P07D03LVG

SI4936BDY-T1-E3

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

The structure of the MOSFET shown in the figure is not suitable for use in high-power applications for two reasons. On the one hand, the three electrodes of the low-power MOSFET are on one plane, the channel cannot be made very short, and the channel resistance is large. On the other hand, the conductive channel is composed of surface induced charges, and the channel current is the surface current. To increase the current capacity, it is necessary to increase the chip area. Such a structure is unlikely to achieve a large current. .

For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself. .

When the low UDS separate pinch off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). Growth slows as the conduction channel approaches pinch off. Figure 1. Drain output characteristics of MOS transistors The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current region. Variable resistance region (UDS In this region, ID increases linearly as UDS increases.

BYN3232_P07D03LVG

NCE25TD135LT NCE15TD135LT NCE15TD120LP NCE15TD135LP NCE25TD120LP.

The performance parameters of NCE3401 are still good, suitable for load switching or pulse width modulation applications, and the impedance value is relatively low, and the new clean energy MOS tube has the characteristic process technology of shielded gate power and super junction power MOSFET. The parameter performance and sample delivery performance can be almost the same as foreign MOS tubes, such as the same used in lithium battery protection boards, NCE3401, AO3401, IRLML5203TR, DMP3098L-7, I think the functions can be satisfied in comparison, and the price is moderate NCE3401 is more suitable.

relevant information