BYP32058_FDS6990AS-NL Introduction

Assuming that the carriers of the conductive channel are electrons, it is called an N-channel; assuming that the carriers are holes, it is called a P-channel. According to the carrier of the conduction channel, it can be divided into N channel and P channel. A MOS tube is a semiconductor device in which unipolar carriers participate in conduction.

The core of power semiconductors is the PN junction. From diodes, triodes to field effect transistors, various applications are made according to the characteristics of the PN junction. Field effect transistors are divided into junction type and insulated gate type, among which the insulated gate type is also called MOS tube (Metal Oxide Semiconductor). According to whether the inversion layer exists in the case of no electricity, MOS tubes can be divided into enhancement type and depletion type.

BYP32058_FDS6990AS-NL

BYN4286

Power MOSFETs are generally rarely used in P-channel. Since the mobility of holes is lower than that of electrons, the on-resistance of P-channel transistors is larger than that of N-channel transistors for the same channel size. . According to the two points of the conductive channel and the process of channel formation, MOS tubes can be divided into: P-channel enhancement MOS tubes, P-channel depletion MOS tubes, N-channel enhancement MOS tubes and N-channel depletion MOS tubes . Figure four types of MOSFETs and their graphical symbols.

BYP31538 BYP31510 BYP31575 BYH31574 BYD31523A BYH31532 BYM31580 BYH31519 BYS31535 BYM31545 .

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

BYS31511 BYH32025A BYS32026A BYP32027A BYF32028A BYF32018A BYD32011Z BYF32090 BYJ32056 BYP32011A

BYP32058_FDS6990AS-NL

DMN4031SSD-13

NCE3008M NCE3010S NCE3011E NCE30D0808J NCE3018AS.

The structure of the MOSFET shown in the figure is not suitable for use in high-power applications for two reasons. On the one hand, the three electrodes of the low-power MOSFET are on one plane, the channel cannot be made very short, and the channel resistance is large. On the other hand, the conductive channel is composed of surface induced charges, and the channel current is the surface current. To increase the current capacity, it is necessary to increase the chip area. Such a structure is unlikely to achieve a large current. .

BYM4610 BYM4640 BYM4875 BYM81080 BYM81095 BYM826 BYM8311 BYM8315 BYH8415 BYM8415.

NCE3020K NCE3025Q NCE3035K NCE3025G NCE3030K.

BYP32058_FDS6990AS-NL

NCE8205B NCE8205 NCE8205i NCE8205E NCE9926.

NCE25TD135LT NCE15TD135LT NCE15TD120LP NCE15TD135LP NCE25TD120LP.

relevant information