AW3610DNR is a high-efficiency synchronous boost DC with adjustable current limit and 5V output. AW3610 is a constant 5V output, high current, high efficiency synchronous boost DC-DC converter chip. The output current can reach 0.95A@Vin=3.8V, which is suitable for single-cell lithium battery-powered systems, such as mobile phone power banks and USB-OTG applications.

The AW3610 adopts PWM current mode control, and uses a high switching frequency of 1.5MHz when working in continuous mode (CCM) to reduce the size of external components and save PCB space. When working at light load, it automatically enters Burst mode to achieve high efficiency in the full load range. The quiescent current at no-load is only 30A, which greatly prolongs the standby time.

For the mobile phone power bank application, AW3610 integrates the function of one-line pulse adjustment input current limiting to limit the output current. At the same time, there is a built-in substrate switching circuit, which realizes "true" isolation of input and output when shutting down, effectively preventing input leakage and output back-feeding.

AW3610 also adopts K-limitTM intelligent temperature-current balance technology, the input current limit value automatically decreases with the increase of chip temperature, effectively preventing the chip from overheating.

AW3610 has built-in multiple protections, such as output overvoltage protection, output short circuit protection, input low voltage protection and over temperature shutdown protection.

The AW3610 is available in a tiny DFN2x3-8L package and is rated for an operating temperature range of -40 to 85. Product Model Operating Temperature Range Package Form Device Identification Shipping Form

AW3641DNR -4085 DFN3x3-10L AW3641 Tape and Reel

6000 pieces/reel

5V USB OTG and Power Bank Power Solution

Output current limiting one-line pulse adjustable, three-speed intelligent current limiting

Peak efficiency up to 92%

Using burst technology, high efficiency in the full load range

No-load power consumption: 30A (typ.)

High switching frequency of 1.5MHz allows small inductance of 1H

Temperature foldback technology to prevent the chip from overheating

2.9V4.5V input voltage

VOUT pin DC withstand voltage 9V (EN=0)

The output is "true" isolated from the input to prevent back-feeding at VOUT

Built-in over-voltage, over-temperature, output grounding protection

Tiny DFN2x3-8L Package