SI6880AEDQ-T1-GE3 Introduction

Today I will introduce to you a domestic FET that is suitable for lithium battery protection boards and can replace MOS tubes such as AO3401: NCE3401.

According to the carrier of the conduction channel, it can be divided into N channel and P channel. Assuming that the carriers of the conductive channel are electrons, it is called an N-channel; assuming that the carriers are holes, it is called a P-channel. A MOS tube is a semiconductor device in which unipolar carriers participate in conduction.

CEM8208_SI4804CDY-T1-E3

SI6880AEDQ-T1-GE3

Working principle of power MOS tube Power MOS tube is developed from low-power MOS tube. However, in terms of structure, there is a big difference between them. In order to better understand the mechanism of power MOSFET, we must first recall the mechanism of low-power FET. . The following describes the principle of the MOS transistor with the structure of an N-channel enhancement type low-power MOSFET.

MOS tube is a metal (Metal)-oxide (Oxide)-semiconductor (Semiconductor) field effect transistor, or metal-insulator (Insulator)-semiconductor. .

. The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type.

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

CEM8208_SI4804CDY-T1-E3

SI6880AEDQ-T1-GE3

When the applied forward voltage increases, the concentration of unbalanced minority carriers increases and the concentration gradient also increases, and when the applied voltage decreases, the change is opposite. Diffusion capacitance: When a forward voltage is applied, the non-equilibrium minority carrier concentration near the interface of the depletion layer is high, far from the non-equilibrium minority carrier concentration is low, and the concentration gradually decays from high to 0 until it reaches zero. The process of charge accumulation and release in this phenomenon is the same as that of capacitor charging and discharging, which is called diffusion capacitance.

MOSFET is a type of FET (the other is JFET), which can be made into enhancement mode or depletion mode, P-channel or N-channel, a total of 4 types, but only the enhancement-mode N-channel MOS is actually used. Tube model and enhanced P-channel MOS tube model, so NMOS is usually mentioned, or PMOS refers to these two.

For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself. .

NCE3008M NCE3010S NCE3011E NCE30D0808J NCE3018AS.

CEM8208_SI4804CDY-T1-E3

The lithium battery of electric vehicles can work normally, largely thanks to the lithium battery protection board.

NCE25TD120WT NCE25TD120VT NCE15TD120LT NCE25TD120LT NCE40TD135LT.

relevant information