ISL59448 is a three -channel 2: 1 multi -way replicator with integrated buffer, fixed gain 2, high conversion rate and excellent video switching band width. Equipment function, a three -state output (Hiz), allows bundling multiple devices together. The power -off mode (enlarged) includes the non -needed circuit sensitive application in the power supply. When the capacity is high, the component enters the power -off mode and consumes only 14 MW. The additional function is to lock the opening function (LE) allows the use of public logic for independent logic control

Note: Ready -free+annealing products use special lead -free material group; mold/mold connection material and 100 %of the final decoration of the matte tin plating board, compliance with the ROHS standards compatible with SNPB and lead -free welding operations. Lead-leading products are classified as MSL at the time of lead-free peak return welding to the temperature IPC/JEDEC J standard -020 that MSL meets or exceeds the lead-free requirements. Bus

Features

500MHz bandwidth

± 1600 V/microsecond conversion rate

High impedance buffer input

Internal setting gain -2

High -speed three -state output (HIZ)

Power off mode (enabled)

Lock enabled

] Power current 11mA/CH

Provides lead -free and annealing (in line with ROHS)

]

[123 ] Absolutely maximum rated value (TA 25 ° C)

Power voltage (V+to V-). 11 volts

Input voltage. Voltage --0.5 volt, voltage ++ 0.5 volts

The power supply connection conversion rate. 1V/microsecond

Digital and analog input current (Note 1). 50 mia

output current (continuous). 50 mia

Static discharge rated value

Human model (according to the MIL-SD-883 method

.7). 2500 Fu Machine model. 300 volts

Storage temperature range. -65 ° C to+150 ° C

Environmental operating temperature. -40 ° C to+85 ° C

The working knot temperature. -40 ° C to +125 ° C

Power consumption. See the curve

Note: The stress listed in the absolute maximum rated value " may cause permanent damage to the device. This is a stress level and the above conditions described in the operation chapter of this specification or the device under any other conditions.

Note:

1. If the input signal is applied before the power supply is powered