• 2022-09-24 23:24:28

Features • Operates down to 1V differential, 1.5V@max. Current • 0.015% line regulation • 0.01% load regulation • 1% reference voltage • Hermetically sealed TO-257 and TO-258 isolation packages • Electrically equivalent to LT1083, 84, 85 and 86 The three terminal positive adjustable regulators described are designed to provide 7.5A, 5A, 3A, and 1.5A, with higher efficiency ...

• 2022-09-24 23:24:28

Features • Similar to the industry standard LM2940 • Low dropout typically 0.5V @ IO= 1A • Output current up to 1A • Reverse battery protection • Internal short circuit protection • Isolation hermetic surface mount package DESCRIPTION This three-terminal fixed regulator is designed to provide high 1.0A efficiency. It has a source 1A output current capability with...

• 2022-09-24 23:24:28

Features • Similar electrical characteristics to the industry standard LM117AHV • Adjustable output voltage • Built-in thermal overload protection • Short circuit current limiting • Available in four hermetically sealed packages • Guaranteed ± 1% maximum output voltage tolerance • Radiation resistant to 150K RAD (four) • Available High Reliability Screening, Class B...

• 2022-09-24 23:24:28

These voltage regulators are monolithic integrated circuits designed as fixed voltage regulators for a variety of applications including local, on-card regulation. These regulators employ internal current limiting, thermal shutdown, and safe area compensation. With sufficient heat dissipation they can provide output current in excess of 1.0 A: Although primarily designed as a fixed voltage re...

• 2022-09-24 23:24:28

The LM117 adjustable three-terminal positive voltage regulator is capable of delivering 0.5A over an output range of 1.2V to 37V. It is very easy to use and only requires two external resistors to set the output voltage. Also, line and load regulation is better than standard fixed regulators. In addition to higher performance than fixed regulators, the LM117 provides full overload prote...

• 2022-09-24 23:24:28

Overview The MIC2920A family of "invulnerable", highly efficient voltage regulators with very low dropout voltage (typically less than 40mv differential at 250mA light load and 370mV), and very low quiescent current (140mA typical). The quiescent current of the MIC2920A only slightly increases dropout, extending battery life. Key MIC2920A features include reverse battery protect...

• 2022-09-24 23:24:28

Overview The MIC5258 is a high-efficiency, accurate CMOS regulated power-good output. The MIC5258 provides better than 3% initial accuracy and is constantly overloaded with current (typically 100µA). The MIC5258 also features low ESR ceramic capacitors, critical for reducing the amount of power necessary to reduce board space in handheld wireless devices. Key features includ...

• 2022-09-24 23:24:28

illustrate The MC78MXX/LM78MXX series of three-terminal positive regulators are available in TO-220/D-PAK with several fixed output voltages, which are useful in a wide range of packages. Features • Output current up to 0.5A • Output voltage 5, 6, 8, 12, 15, 18, 24V • Thermal overload protection • Short circuit protection • Output transistor safe operating area (SOA...

• 2022-09-24 23:24:28

The NCP2860 is a low noise, low dropout linear regulator, providing an output voltage of 2.77 volts, it provides an input from 3.0300 mA V to 6.0 V. If desired, the “ET” pin can adjust the output voltage level and then the voltage applied to this pin depends on. The NCP2860 features transient response, PSRR and noise, making it an ideal solution for audio applications (such as ...

• 2022-09-24 23:24:28

The LM2931 series includes active fixed and adjustable outputs that are specifically designed to maintain proper voltage regulator regulation with extremely low input to output voltage differences. These devices supply excess output current capability of 100 mA and feature a low bias current of 0.4 mA at 10 mA output. Designed primarily to survive harsh automotive environments, these devic...

• 2022-09-24 23:24:28

The L200 is a monolithic integrated circuit with programmable voltage and current regulation. This is available in Pentawatt[packages or 4-pin TO-3metalcase.Current limiting, powerlimiting, thermal shutdown and input overvoltage protection (up to 60 V) make the L200 nearly blowout proof. The L200 can be used in place of a fixed voltage regulator when high output voltage accuracy of the ...