Hardened HS-117RH Radiation is an actively regulated voltage linear regulator capable of operating up to 40VDC. This voltage is adjusted from 1.2V to 37V with two external resistors. The device can be sourced from 50mA to 1.25APEAK (minutes). Protection is provided by on-chip thermal shutdown and output current limit circuitry. Intersil's HS-117RH has the advantage ove...
Read more
Description The FAN1117A and FAN1117A- 1.8, -2.5, -2.85, -3.3 and -5 are low dropout three terminal regulators with 1A output current capability. These devices have been optimized for low voltage transient response and minimum input voltage are critical. The 2.85V version is designed for use on SCSI buses in active termination. Current limit adjustment to ensure specified output...
Read more
Description The FAN1581, FAN1581-1.5, and FAN1581-2.5 are ultra-low price regulators with poor output current capability of 5A. These devices have been optimized for low voltage applications including VTT bus termination, where transient response and minimum input voltage are critical. The FAN1581 is ideal for low voltage microprocessor applications requiring a regulated output...
Read more
The HIP6502B complements either an HIP6020 or the HIP6021 in ACPI compatible microprocessor designs and computer applications. The IC integrates four linear controller/regulator, switching, monitoring and control functions into a 20-pin SOIC package. A linear controller generates voltage from the 5VSB output of the ATX 3.3VDUAL/3.3VSB aircraft power supply, pow...
Read more
Description and GS1084 is a low-dropout three-terminal regulator with 5A output current capability. The output voltage is regulated by the same resistor divider. For the fixed output voltage version, the output voltage is internally set to 1.8V, 2.5V or 3.3V. The difference is guaranteed at a maximum of 1.4V at the maximum output current. Its low dropout and fast transient response mak...
Read more
Description and GS1085 is a low-dropout three-terminal regulator with 3A output current capability. The output voltage is regulated by the same resistor divider. For the fixed output voltage version, the output voltage is internally set to 1.8V, 2.5V or 3.3V. The difference is guaranteed at a maximum of 1.4V at the maximum output current. Its low dropout and fast transient response mak...
Read more
Overview The HA13164A is a compact car audio system with multiple voltage regulators. The output output of this IC includes a microcontroller that regulates 5.7 V output, regulates 8 V CD drive, regulates 9.0 V output for audio control, regulates 10 V output for lighting and 5 V regulates output, VCC dependent output external output and VCC - Depends on remort- ANT output....
Read more
While the CS8182 is a monolithically integrated low dropout tracking regulator designed to provide a buffered output voltage adjustable, closely tracking (halogen 10mV) reference input. The output provides up to 200mA while being able to be configured higher, below or equal to the reference voltage. The outputs have been designed to operate over a wide range (2.8 V to 45 V) while still ma...
Read more
The CS8281 is a high precision, dual 5V micropower linear regulator. The primary output switch (VOUT1) provides up to 250mA while the secondary (VOUT2) is capable of supplying 100mA. Both outputs have low back current with a maximum dropout voltage of 600mV. Quiescent current consumption is typically 150µA to 100µA from each output when powered. The ENABLE input provid...
Read more
The CS8371 is an 8V/5V dual output linear regulator. The 8V±5% output sources 1A, while the 5V±5% output sources 250mA. Each output controls its own enable lead. Set the ENABLE input at the high turn output of the relevant regulator. While holding ENABLE input low the current consumption is less than 10µA when put into sleep IC mode. The regulator is protected again...
Read more
The CS9201 is a precision 5.0 V, 100 mA low voltage regulator with quiescent current (450 mA typical @ 100 mA load). The 5.0 V output is within ±2% and supplies exactly 100mA of load current with only 600 mV maximum dropout. Regulators protect against reverse battery, short circuit, overvoltage and temperature conditions. The device can withstand 74 V peak transients making it suita...
Read more