Among them, vin, min is the minimum input voltage, and iOUT is the total output current. Note: The lower the value of the inductor (the lower the switch frequency), the bandwidth can be achieved. The output capacitor must directly participate in the voltage circuit converter to avoid large enough line conversion from the maximum input voltage to the minimum input voltage ( #8710; VO...
Read more
Features Low offset voltage: 25 μV (maximum) zero drift: 0.03μv/° C #8226 ; Low noise: 8.8 nv/√Hz -0.1-Hz to 10 Hz noise: 0.25 μVPP Excellent DC accuracy: -D power suppression Bi: 142 decibel -CMRR: 146 DBS -Bei ring gain: 136 db gain bandwidth: 2 MHz ...
Read more
Features Wide power supply range: ± 5V (10V) to ± 50V (100V) high output load driver: IO GT; ± 50mA [123 123 [123 ] Wide output voltage swing: 1V to orbit Independent output disable or close Wide temperature: --40 ° C to to +85 ° C Software package: SO and HSOP POWERPAD #8482; Test equipment #8226; avalanche Photodiode...
Read more
Functional description (Unless otherwise explained, otherwise) LMC7215/LMC7215-Q1/LMC7225 ultra-low power of the power comparator with a power consumption of 0.7 μA power supply. They are designed to work within a wide range of power supply voltage range from 2V to 8V, from 2V to 8V. The input of the co-mode range exceeds V+and V LMC7215/LMC7215-Q1/LMC7225. Th...
Read more
Features multi -rate operation, from 155 Mbps to 4.25 gbps 89 MW power consumption input Disposal cancellation High input dynamic range output disable cml data output # 8226; Receive signal strength index (RSSI) Signal loss detection polar choice single 3.3V power supply surface installation 3-mm × 3-mm 16-pin QFN packaging compatible...
Read more
Functional description LM2937 is a positive voltage regulator, which can fully specify that it provides a load current of up to 500 mAh under 40 ° C. Use+125 ° CPNP power transistor to provide a low -voltage difference voltage output current exceeding 500 mA. When the load current is 500 mAh, at the minimum input-output voltage difference of all requirements, the working condit...
Read more
Features Outstanding video performance Internal gain: 6DB 2 pole constant constructor arcting correction reduce the size of the coupling electric container size The input range includes ground DC coupling input Integrated integration The level converter DC coupling output (1) no output capacitor Rail -to -rail infusion L...
Read more
Features Compatible with LM111 series equipment Guaranteed maximum 0.5mv input offset voltage Guarantee maximum 25NA input bias current Guarantee guarantee Maximum 3NA input offset current Guarantee maximum 250ns response time Guarantee minimum 200000 voltage gain 50mA output current source or exchange ± 30V differential input Voltage fully stipulated that for ...
Read more
Function description LMH0046 HD/SD SDI re -locking time sequence support SMPTE 292M and SMPTE 259m (A AMP; AMP; C) The serial digital video standard conforms to SMPTE 292M digital video data and SMPTE 259m ( A amp; amp; c) standard. LMH0046 supports 143 Mbps, 270 Mbps, 1.483 Gbps, runs with serial data rates of 143 Mbps, 270 Mbps, and 1.485...
Read more
Features gain bandwidth multiplication: 5.5MHz Low noise: 7.5nv/√Hz #8226 at 1kHz #8226 ; Offset voltage: 1MV (maximum) Enter bias current: 0.2Pa The unit gain is stable EMI input filter Static current: 0.76ma/ch power supply voltage: 2.2V to 5.5 V Small packaging: SC70, SOT23 and MSOP Optical diode front placement large #8...
Read more
Features Power range:+2.7V to+36V, ± 1.35V to ± 18V Low noise: 19V/√Hz RFI filter input The input range includes negative power ; Rail -to -track output gain bandwidth: 1.2MHz Low static current: each amplifier 110 μA High Communist Party Model suppression: 120db Low bias current: 15Pa (maximum) –8 stitch MSOP –14 needle ...
Read more