Functional description LP2957 is a 5V micro -power voltage regulator 2 5V output, the temperature exceeds 1.4%(A level) with electronic shutdown, the error logo, very low Static current (a typical 150 μA under the 1 ma load), and easy to program, to achieve fast start/rapid disconnection very low voltage drop (250 mAh out of 470 millivoltage output load current). Ensure that th...
Read more
Generally explained LP2967 is a 150 mAh, and the dual fixed output voltage regulator aims to provide ultra -low voltage drop and low noise for the application of battery power. Using optimized VIP (vertical integrated PNP) process, LP2967 provides unparalleled performance in all the vital specifications of battery design: Falling voltage: Usually 240 mm under 150 mAh load is 2...
Read more
Features ● Bandwidth: 350MHz-8P ● High-output current: ± 70ma ● conversion rate: 2100V/μs, 5VP-P 123] ● Differential gain/phase: 0.12%/0.05 ° ● Low static current: ± 4mA ● Low input bias current: 1.2 μA ● Rising time : 1.9ns, 5VP-P ● Settlement time: 9ns, 0.1% Application ● Broadcast/HD TV equipment ● High-speed digital communication ...
Read more
General features Load transient boost (LTB) technology #8482; to minimize the number of output capacitors as much as possible (is applying for a patent) 123] Optional 2 or 3 phase operations 0.5%output voltage accuracy 7/8-bit programmable output of 1.60000V -Intel VR10.x, VR11 DAC [ [ [ [ [ [ [ [ 123] 6-bit programmable output of 1.5500V-AMD 6-bit DAC Large-cur...
Read more
Features ● High output current: 2A ● Output swing to: 150mv rail, IO u003d 2a ● Hot protection ● Yes, yes possible Restrictions ● Two signs: current limit and temperature warning ● Low -voltage operation: 2.7V to 5.5V ● Output closing function ● Small power component: SO-20 POWERPAD #8482; Application ● Thermoelectric cooler driver ● Las...
Read more
Modification of LTB gain (optional) Internal gains can be modified through SS/LTBG/AMD pins, as shown in Figure 13. SS/LTBG/AMD pins are also used to set up soft startup time, so the SS/LTBG/AMD pin must be modified after the soft start is completed. Use the D diode and R3 resistor (the red block in Figure 13). After the soft start, the current from SS/L...
Read more
Features ● Large signal bandwidth: 150MHz (AP), 200MHz (AU) (voltage feedback) ● High output current: ± 70ma ● conversion rate : 1500V/μs (AP), 1700V/μs (AU) ● Differential gain: 0.15% ● Differential phase: 0.08 ° ● Excellent bandwidth/power supply Current ratio: 200MHz/5mA ● Low input bias current: --1.2μA Application ● Broadcast/HD TV...
Read more
The charger is a multi -state (level 2) lithium -ion battery charger (constant current/constant voltage) that can provide up to 2A charging current single battery lithium ion batteries. LX2201 is a cost -effective, high -performance USB battery charger. The LX2201 type has a 2A high -charging current using an isolated automatic energy -saving battery topology. The user's programmable ...
Read more
Very low voltage drop (0.25V typical) Exit control logo Very low static current (typical value. The closing mode is 90 μA, and the 500μA mode is in the opening mode) Output current is as high as 200 mia Logical control electron Close output voltage 3V, 5V 8.7V 12V Internal current And thermal limit Stability is only 2.2 μF 25 ° C, you can choose ± 2% Po...
Read more
Features ● 1.2A output current 12VP-P output voltage ● [ 123] Width power range: Single power supply:+7V to+15V dual power supply: ± 3.5V to ± 7.5V ● Complete protection: heat shutdown adjustable current limit ● Output Disable control ● 17MHz gain bandwidth product 50V/μs conversion rate ● 1MHz full power bandwidth ● Th...
Read more
Function pack Internal startup deviation regulator TSSOP -6 Able-avairy line owl lock WSON-16 (5x5 mm) Thermal enhancement type (UVLO) has adjustable magnetic stagnation current mode control LM5041 PWM controller contains all reference internal error release large device Realization The current FED or dual -mode overcurrent protection voltage feedback ele...
Read more