Features ● Low voltage: maximum 75 μV ● Low VOS drift: maximum 1.3 μV/° C ] ● Super stable vs. Time: Maximum 1.5 μV ● Low noise: maximum 0.6 μV P-P ● [ 123] Wide input voltage range: ± 14 V typical values u200bu200b ● Wide power supply voltage range: ± 3 v to ± 18 v ● 125 ° C temperature test dice Application ● Wireless base stat...
Read more
Features, descriptions These devices are designed by two independent voltage composition comparators to work in a wide range of power under a wide range of power supply. As long as the current consumption is and VCC is at least low -power current consumption independent of the power supply voltage. Output can achieve wired and interpersonal relationships. Voltage: Each comparator 0...
Read more
Features ● gain bandwidth: 50MHz ● Zero Division distort topology: excellent THD+N: 0.0004% cmrr: 100db (minimum) Enter 100MV ● Low noise: at 100kHz is 4.5NV/ Hz ● conversion rate: 25V/ μs ]●快速沉降：0.3μs至0.01%●精度： 低偏移：100μV[ 123] low input bias current: 0.2Pa ● to 5.5V operation ● Regulating signal ● Data...
Read more
Functional application High -efficiency multi -gain architecture: Peak DSP power supply efficiency gt; 85%baseband power supply output voltage pair: 1.2V/1.5V and mobile phone and paging machine 1.2V /1.575v [123: 123] Portable electronic equipment Dynamic output voltage selection ± 3%output voltage accuracy description output current as high as 250mA LM2770 is the swit...
Read more
Features ● gt; 1MHz cross -resistance bandwidth Good long -term VOS stability ] ● Bias current: 50Pa (maximum) ● offset voltage: 25 μV (maximum) ● Dynamic range: 4 to 50 years ● Drift: 0.1 μV/° C (maximum value) ● gain bandwidth: 90MHz ] ● Static current: 7.5ma ● Power range: 2.7V to 5.5V ● single and dual duality Version ...
Read more
Features gain u003d+2 bandwidth (1400 mHz) gain u003d+8 bandwidth (450 mHz) # 8226; output voltage swing: ± 4.2V Ultra high conversion rate: 4300 V/μs 50 mHz) Low power: 129 MW Low -loss power: 0.5 MW Packaging: SOIC -8, vssop-8, SOT23-6 Application Very broadband ADC drive 123] Broadband video line driver Portable inst...
Read more
Function description LMX2306/16/26 is a single -piece integrated 2.3V to 5.5V operation with a premature frequency synthetic Silicon BICMOS 0.5 μl. LMX2306 contains 8/9 dual-mode pre-scoring device. MA. Application LMX2306/16/26 has ultra -low current characteristics Ultra -low current consumption design for generating very stable low current 2.5V VCC JEDE...
Read more
Input Return Losses (S11) Input Return loss is to measure the degree of input impedance (frequency) and source impedance matching. This is a relatively independent gain setting, whether it is non -conversion configuration and reversal configuration. Typical features show the S11 order of Figure 48 and Figure 49 to 1GHz circuit (non-reversible gains are +8 and reverse gains to -8 op...
Read more
Features 2.16 V to 3.6 V power supply voltage 1.8V compatible iOS lt; 1 mesh power consumption ± 2g/± ± 8G dynamic selection full label I2C/SPI digital output interface A programmable interrupt generator Embedded click and double -click recognition Embedded freedom Poor and Movement Detection Embedded high -pass filter Embedded self -test 10000 G H...
Read more
Features High Bandwidth: 150MHz set 16 -bit in 150ns [ 123] Low noise: 3NV/√Hz Low distortion: 0.003% #8226; Low power: 5.5V at 9.5ma (typical value) Close to 5 μA units stable ] excellent output motion: (V+ 100MV to (v )+100mv Single power supply: +2.7V to+5.5V Sma...
Read more
Features The supercharged section –4.5 V to 36 V input voltage range - Internal power MOSFET - Internal++ internal+ 5 V LDO, for equipment power supply -The output voltage is as high as 36 V -The constant frequency peak current mode control –250 kHz to 1 MHz adjustable switch frequency - Multi -device external synchronization Application - The pu...
Read more