Features 2.5V output voltage Ultra-low current consumption: 40mA typical. High precision @25℃±2% and ±1% Stability at high use Capacitive loads Industrial temperature range: -40 to +85°C 150ppm/°C maximum temperature coefficient DESCRIPTION The TS4040 is a low power shunt voltage reference providing a stable 2.5V output voltage over the industrial temperature range (-...
Read more
Features 1.225V typical output voltage Ultra-low operating current: 40mA typical. High precision @ 25 +/-2% (Standard Edition) +/-1% (Grade A) +/-0.5% (Grade B) with high STABILITYWHEN Capacitive Load Wide Temperature Range: -40 to +85 Isle C T092 with SOT23 -3 Package describe TheTS821 is a micropowerintegrated circuit that is a highly stable, two terminal, ...
Read more
DESCRIPTION The UC39431 is an adjustable shunt regulator with a sink capacity of 100mA. The architecture, including an error amplifier and transconductance amplifier, provides the user with individual control of the small error voltage signal with a fixed linear frequency response to the transconductance. A minimum 3MHz gain-bandwidth product is both error and transconductance a...
Read more
Describes the thermal stability guarantee of the mPC1093 adjustable precision shunt regulator. The output voltage can be set to any value between the reference voltage (2.495 V) and 36 V by two external resistors. These ICs can be used in error amplifiers for switching regulators. Features • High accuracy • Low temperature coefficient • Adjust output voltage via two external resist...
Read more
Description The US431L product is a 3-terminal adjustable shunt regulator that can also be used as a precision voltage reference. Its output voltage can be set to any value between the voltage Vref (1.24V) and 6V with two external resistors as shown in the typical application circuit. Other applications of the device include use as a combined power amplifier and reference at the time of ...
Read more
Explain that the WS336-5.05.0V integrated circuit is a precision shunt regulator. The monolithic integrated circuit's operating voltage reference serves as a low temperature coefficient with a 0.6ohm5.0V zener dynamic impedance. Author: WS336- 5.0 The third terminal makes reference voltage and temperature coefficient for trimming easy. The WS336-5.0 is useful as an accurate 5.0V ...
Read more
GENERAL DESCRIPTION The WSL431 is a 3-terminal, commercial thermally stable adjustable voltage reference applicable over the specified operating temperature range. The output voltage can be set to any voltage between Vref (2.505V) and 20V with two external resistor values (see Figure 2). When used with an optocoupler, the WSL431 is an ideal reference switch-mode powe...
Read more
Product Description The SPX431 is a three-terminal adjustable shunt regulator that provides a highly accurate 0.5% bandgap reference. The SPX431 acts as a reference for open loop and a 2.5V temperature compensated error amplifier. The SPX431 thermal stability, wide operating current (150mA) and temperature range (0°C to 105°C), can satisfy all varieties of applications that are...
Read more
General description The TC1043 is a mixed function device combining two general purpose operational amplifiers, two general purpose comparators, and a 16 reference voltage pin package. This increased integration enables users to replace two or three packs, saving space, reducing supply current, and improving system performance. Shut down the input, place SHDN, disable the op amp and a co...
Read more
Overview For tight applications, the TCN4040 precision voltage reference is available in a space-saving 3mm x 1.3mm SOT-466-3 surface mount package. The TCN4040 eliminates the need for external stabilization capacitors, while remaining stable with any capacitive load. The minimum operating current is 60mA. The maximum working current is 15mA. To ensure that the main components hav...
Read more
Adjustable output voltage Sink capability from VREF to 36V 1 to 100mA TYPICALOUTPUT impedance 0.2 watts 0.4% and 0.25%, voltage accuracy describe The TL1431 is a programmable shunt voltage reference and guarantees temperature stability over the entire temperature range. The output voltage can be set to any value between Vref (about 2.5V) and two 36V external resistors. ...
Read more