• 2022-09-23 11:08:02

feature Nonvolatile memory holds wiper settings; 64-bit digital potentiometer; compact MSOP-10 (3mm x 4.9mm) I2C compatible interface; VLogic pins provide added interface flexibility; end-to-end resistance 1 kΩ, 10 kΩ, 50 kΩ, 100 kΩ; resistance tolerance stored in EEPROM (0.1% accuracy); power-up EEPROM refresh time

• 2022-09-23 11:08:02

feature Peak efficiency>85% Low EMI low ripple Output voltage 1.3V/1.8V Input Voltage Range: 2.2V to 5.5V Output Current: Up to 250mA Output voltage accuracy ±2.5% 30 microamp operating current ICC

• 2022-09-23 11:07:14

Silicon carbide (SiC) is a widely used old-fashioned industrial material that has been mass-produced since 1893 and is still in use today. However, silicon carbide is difficult to find in nature, and the mineral moissanite in meteorites contains silicon carbide. Due to the high hardness of silicon carbide, the main use of silicon carbide is as an abrasive, it is also used in automobile brake ...

• 2022-09-23 11:07:14

As the automotive industry accelerates its transition to automotive Ethernet technology, comprehensive design validation is critical to ensure interoperability and reliable operation among multiple ECUs. The concept of automotive Ethernet was proposed by the OPEN Alliance SIG, also known as IEEE 802.3bw (formerly BroadR-Reach), an Ethernet physical layer standard designed fo...

• 2022-09-23 11:07:14

feature Contains internal oscillator and reference voltage; no adjustment required; half-bridge interface, 4-wire LV DT; DC output proportional to position; 20 Hz to 20 kHz frequency range; unipolar or bipolar output; also decodes AC signals; excellent Linearity: 0.05%; Output Voltage: 611V ; Gain Drift: 20 ppm/8C (typ.); Offset Drift: 5 ppm/8C (typ.). Product Description T...

• 2022-09-23 11:07:14

feature Low Offset Voltage: 1 mV; Input Offset Drift: 0.005 mV/8C; Rail-to-Rail Input and Output Swing; +5 V/+2.7 V Single Supply Operation; High Gain, Common Mode Rejection Ratio, PSRR: 130dB ; Ultra-low input bias current: 20 Pa; low supply current: 700 mA/op amp; overload recovery time: 50 ms; no external capacitors required. application Temperature Sensors; P...

• 2022-09-23 11:07:14

feature Common built-in thermal shutdown circuit (TSD) 8 independent voltage sources Corresponds to 3.3V or 5V digital signal processor 4 optional silent input spindles Output PWM Mode Control FG output: Open collector type Optional braking (short braking and reverse braking) built-in Hall bias 180o commutation (compatible with traditional brushless DC spindle motors) Built-in...

• 2022-09-23 11:07:14

feature Precise fixed operating frequency FS7M0680 (66kHz) Pulse-by-Pulse Current Limiting overcurrent protection Overload protection Overvoltage protection (minimum 25V) Internal thermal shutdown function Undervoltage Lockout with Hysteresis Internal high voltage sense FET Latch Mode soft start illustrate The Fairchild Power Switch (FPS) product family is designed for...

• 2022-09-23 11:07:14

Seven DFM Issues Hidden in PCB Design When our product has a large number of Design for Manufacturability (DFM) errors after we have completed the design and sent it to the fab, it can lead to product shelving. This situation is not only frustrating, but also costly. Considering manufacturing issues early on in a project can help reduce costs, shorten development time, and ensure...

• 2022-09-23 11:07:14

1. Introduction Active clamp forward (ACF) controllers are popular in high frequency dc-dc modules: near-zero voltage switching, reduced size magnetics, and energy-efficient designs are the hallmarks of ACF. If designing a power stage requires attention to any high-power design, the control-output transfer function of the converter provides a good understanding of the compensation strateg...

• 2022-09-23 11:07:14

feature SNR = 57 dB @ 39 MHz analog input (-0.5 dBFS); low power; 190 mW at 65 MSPS; 285 mW at 105 MSPS; 30 mW power-down mode; 300 MHz analog bandwidth; on-chip reference and track/hold; 1 V pp or 2 V pp analog input range options; single 3.3 V supply operation (2.7 V-3.6 V); twos complement or offset data format options. application Battery-powered instruments; handhe...