News

  • 2022-09-23 10:13:06
A3984 is a DMOS microstepping driver with converter

Features and Benefits ▪ Low RDS (on) output ▪ Automatic current decay mode detection/selection ▪ Mixed and slow current decay modes ▪ Low power synchronous rectification ▪ Internal UVLO and thermal shutdown circuitry ▪ Cross current protection illustrate The A3984 is a complete microstepping motor driver with built-in translation for easy operation. It is designed to operat...

Read more
  • 2022-09-23 10:13:06
HA5024 Quad 125MHz Video Current Disable Feedback A...

The HA5024 is four versions of the popular Intersil HA5020 . It has a wide frequency band and high slew rate, and is optimized for video applications with gains between 1 and 10. It is a current feedback amplifier and therefore produces less bandwidth degradation at high closed loop gain voltage feedback amplifiers. Low differential gain and phase, 0.1dB gain flatness, and the ability to...

Read more
  • 2022-09-23 10:13:06
Understand the two major hazards of CMOS

For analog CMOS (Complementary Symmetric Metal Oxide Semiconductor), the two main hazards are static electricity and overvoltage (signal voltage exceeding supply voltage). By understanding these two hazards, users can effectively deal with them. Static electricity The hazard caused by the electrostatic voltage formed by the accumulation of electrostatic charges (V=q/C=1kV/nC/pF) ...

Read more
  • 2022-09-23 10:13:06
What is a PCB eye diagram?

What is the use of eye diagrams in PCB design? The eye diagram is due to the afterglow effect of the oscilloscope, which overlaps the waveforms of each symbol obtained by scanning to form an eye diagram. This article will lead you to understand what the eye diagram on the PCB is, how the eye diagram is formed, what information is contained in the eye diagram, and how to distinguish the si...

Read more
  • 2022-09-23 10:13:06
The A3986 is a dual full-bridge MOSFET driver with m...

Features and Benefits ▪ 2-wire step and direction interface ▪ Double bridge full gate drive for N-channel mosfet ▪ Operating voltage exceeds 12 to 50 V ▪ Synchronous rectification ▪ Cross-conduction protection ▪ Tunable mixed decay ▪ Integrated sinusoidal DAC current reference ▪ PWM current control with fixed off-time illustrate The A3986 is a dual full bridge gate driver...

Read more
  • 2022-09-23 10:13:06
Agilent HSDL-3003 IRDA® Data Compliant Low Pow...

illustrate The HSDL-3003 is a small factor enhanced infrared (IR) providing (1) interface capability between logic and IR signals via air, serial, half-duplex IR data link and (2) IR remote control transmission in Best 940nm wavelength universal remote control application. For infrared data communication the HSDL-3003 provides the flexibility of low power SIR applications and...

Read more
  • 2022-09-23 10:13:06
The ADP2119/ADP2120 are 2 A/1.25 A, 1.2 MHz, sync...

feature Continuous output current; ADP2119: 2 A; ADP2120: 1.25 A; 145 mΩ and 70 mΩ integrated mosfet input voltage range from 2.3 V to 5.5 V; output voltage 0.6 V to VIN; ±1.5% output accuracy; 1.2mhz fixed switch Frequency; synchronizable between 1 MHz and 2 MHz; selectable PWM or PFM mode operation; current mode architecture; accuracy threshold enable input; power go...

Read more
  • 2022-09-23 10:11:00
Strawberry Robotic Hand Recognition Algorithm Based on...

The early strawberry picking machinery generally harvested the fruits and stems and leaves together, and then manually separated the fruits and stems and leaves. In 1996, Japan was the first to invent a robotic hand that uses machine vision to recognize fruit picking. The general process of picking strawberries by a robotic hand based on machine vision technology is to first look for ripe stra...

Read more
  • 2022-09-23 10:11:00
Design of commutation control circuit based on terminal vol...

Permanent magnet brushless DC motor has been widely used in many occasions since it appeared in the 1950s due to its many advantages such as no commutation sparks, reliable operation, convenient maintenance, simple structure, and no excitation loss. Conventional PM BLDC motors require an additional position sensor to provide the necessary commutation signals to the inverter bridge. Its ...

Read more
  • 2022-09-23 10:11:00
The ADS1282 is a high-resolution analog-to-digital conve...

Features • High resolution: –130dB SNR (250SPS, high resolution mode); –127dB SNR (250SPS, low power mode) • High Accuracy: THD: –120dB; Inlet: 0.8ppm • Low noise PGA • Dual channel input multiplexer • Inherently stable modulator with fast response over travel detection • Flexible digital filters: Sinc+FIR+IIR (optional); linear or minimum phase respon...

Read more
  • 2022-09-23 10:11:00
HDSP-253x Series 8-Character 5mm Smart Alphanumeric ...

illustrate The HDSP-253x is ideal for displaying dot matrix information of eight or more characters in an aesthetically pleasing way. These devices are 8-bit, 5x7 dot matrix, alphanumeric displays. 5.0 mm (0.2 in) tall characters are packaged in 0.300 in (7.62 mm) 30-pin dip. The onboard CMOS integrated circuit is capable of decoding 128 ASCII characters, which are permanently stor...

Read more