Features Suitable for car applications 18 channel gamma correction Output 10 -bit resolution rail transfers Low power current: 900 μA/CH 123] power supply voltage: 7 v to 18 v Digital power supply: 2.0 V to 5.5 v double -line interface: 3.4 MHz High -speed Mode Provide demonstration boards and software Application Replace resistive gam...
Read more
Features Single series of battery lithium-ion battery fuel meters is located on the system board -Integrated 2.5 VDC LDO -outer low value 10-mΩ 10-mΩ Sensor Patent impedance tracking #8482; Technology - Adjust according to battery aging, self -discharge, temperature and rate change - Report the remaining remaining Capacity, Loading Status (SOC) and Clear time...
Read more
General description lm95221 is a MSOP software package with a double remote diode temperature sensor. The 2 -line serial interface LM95221 is compatible with SMBUS 2.0. LM95221 cans three temperature areas, which can measure the temperature of its own mold and the transistor connected to the two diode. The transistor connected by the diode can be a thermal diode discovered in ...
Read more
Features 1536 -bit disposable programming (OTP) EPROM, used to store user programming data Factory programming No. single-line interface, reduce circuit board wiring synchronous communication reduces host interrupt overhead 6KV IEC 61000-4-4- 2 ESD compliance on the data pin No need for backup power supply provides 3 stitches SOT-23 and To-92 pac...
Read more
Functional applications Four independent output, peak gt; 3A, 1A relay and solenoid valve driver continuous current capacity High Improven car injector The maximum drive resistance of the driver is 1.3 Light drive The real instantaneous power of each switch Restricted Power Switch Switch motor drive High survival voltage (60 VDC, 80V transient state) ...
Read more
Features ● Balanced output ● Low distortion: 0.0005%at f 1kHz ● Wide output swing: 17VRMS to 600 [123 ] ● High -capacity load driver ● High conversion rate: 15V/μs ● The range of power supply is wide: ± 4.5V to ± 18V ● Low static static Current: ± 5.2ma ● 8-needle DIP, SO-8 and SOL-16 package ● Audio differential line receiver supporting...
Read more
General description LP2966 Double ultra -low voltage difference (LDO) regulator work from+2.70V to+7.0V input power. Each output is 150 mAh within the entire temperature range. Integrated circuits work with extremely low drop voltage and static currents are very suitable for battery power supply and portable applications. Each LDO in LP2966 has an independent closing functio...
Read more
General description LMC8101 is a kind of rail -to -line input and output high -performance CMOS operational amplifier. LMC8101 is an ideal low -voltage (2.7V to 10V) application rail input and output. LMC8101 is compared with micro -SMD and 8 -needle MSOP components of mold size. The number of circuit boards required for micro SMD packaging is reduced by 75%compared...
Read more
Features Direct path #8482; - Eliminate the pop -up/click sound - Eliminate the output DC blocking capacitor 3.0V to 3.7V power supply voltage low noise and THD -Sto signal ratio gt; 109db - Typical VN LT; 7 μVRMS 20 --20kHz -10kΩ THD+N LT; 0.002% Enter the output voltage of 5kΩ load –3.3V power supply voltage is 2VRMS ste...
Read more
Features 14-bit resolution 2.4-GSPS maximum update rate digital modulus converter dual differential differences Input port -Data of the number/odd number of the number of unlike -each port maximum 1.2-gsps, a total of 2.4-gsps -Double 14-bit input+1 reference Bit -DDR output clock -DLL optimization clock timing time synchronized with the reference bit -LVDS...
Read more
General description lmv341 / lmv342 /LMV344 is single, double and four low voltage, low power consumption amplifier. They are designed for low -voltage portable applications. Other important product features are low input bias currents, rail output and wide temperature range. The patented AB turnover phase significantly reduces noise, power consumption and departure set voltage at hig...
Read more