News

  • 2022-09-24 23:33:15
HV9110 - High Voltage Current Mode PWM Controller

Via HV9113 Supertex's HV9110 is a series of BiCMOS/DMOS single output, pulse width modulator integrated circuits for switching power supplies using high speed and high efficiency. They provide all the necessary functionality to implement single-switch current-mode PWM, in any topology, with a minimum of external parts. Because they utilize Supertex's proprietary BiCM...

Read more
  • 2022-09-24 23:33:15
IMP38C42/D-BiCMOS Current Mode PWM Controlle...

The IMP38C4x and IMP38HC4x are fixed frequency, high performance, bipolar 384x pin-compatible current-mode PWM controllers imported from BiCMOS devices, but feature improved processing and circuit design. Among the significant improvements are zero current cross-conduction/shoot-through, reduced start-up and operating current, low current detection delays, higher frequency opera...

Read more
  • 2022-09-24 23:33:15
IP1526A - Advanced Regulation Pulse Width Modulator

Features • Low leakage current • 8 to 35V operation • High performance 5V ±1% reference • Low tc 1Hz to 400kHz oscillation range • Dual 100mA source/sink outputs • Digital current limit • Dual pulse rejection • Programmable Dead Time • Accurate Current Limit Detection Voltage • Under Voltage Lockout • Single Pulse Measurement • Programmable Soft-Start • W...

Read more
  • 2022-09-24 23:33:15
IRU3037-8-pin synchronous PWM controller

The IRU3037 controller IC is designed to provide a low-cost on-board DC-to-DC synchronous buck regulator converter application. With today's ASIC migration product requirements, such as low supply voltages of 1.8V and low, coupled with currents exceeding 3A, the legacy is simply too lossy to use a linear regulator when the input supply is 5V, or even in some cases, with 3.3V...

Read more
  • 2022-09-24 23:33:15
IRU3138 - Synchronous PWM Controller Terminates Po...

The purpose of the IRU3138 controller IC is to provide a low voltage tracking cost synchronous buck regulator for applications such as DDR memory and general purpose on-board DC-DC converters. Modern microprocessors combined with DDR memory require a high-speed bandwidth data bus that requires a specific bus termination voltage. This voltage will be tightly regulated, tracked to ...

Read more
  • 2022-09-24 23:33:15
ISL6211 - Crusoe⑩ processor core voltage regulator

The ISL6211 is a single output power controller that powers Transmeta's Crusoe™ CPU core. The ISL6211 includes a 5-bit digital-to-analog converter (DAC) that adjusts the core PWM output voltage from 0.6VDC to 1.75VDC. This DAC setting may change during operation. Special measures have been taken to allow such a transition to control the slew rate, in line with T...

Read more
  • 2022-09-24 23:33:15
FAN5234 - Mobile Friendly PWM/PFM Controller

Features • Wide input voltage range (2 to 24V) for mobile system • Good dynamic response with voltage feedforward and average current mode control • Lossless current sensing with low-side MOSFET or precision over-current sense resistors • Light load hysteresis mode improves efficiency • QSOP16, using TSSOP16 • 300kHz or 600kHz operation Applications • Voltage Regul...

Read more
  • 2022-09-24 23:33:15
FAN7556M-Switching Power Supply Controller

Features • Voltage Mode Control • Pulse Current Pulse Limiting • Low External Components • Under Voltage Lockout (UVLO): 9V/15V • Standby Current: Typical. 100uA • Power Save Mode Current: Typical. 200uA • Operating Current: Typical. 7mA • Soft Start • On/Off Control • Overload Protection (OLP) • Over Current Protection (OCP) • Over V...

Read more
  • 2022-09-24 23:33:15
FAN7601 - Green Current Mode PWM Controller

Features • Green current mode PWM control • Low operating current: 4mA max • Burst mode operation • Internal high voltage startup switch • Under voltage lockout (UVLO): 12V/8V • Latch-up protection and soft-start function • Over-voltage protection: 19V • Operating frequency up to 300kHz • Maximum duty cycle: 95% Typical Applications • Offline Adapter Applicatio...

Read more
  • 2022-09-24 23:33:15
FN9012 - Microprocessor Core Voltage Regulator Two-P...

The ISL6562 two three-phase current mode, PWM control ICs together with companion gate drivers, HIP6601A, HIP6602A, HIP6603A or HIP6604 and MOSFETs provide an advanced precision voltage regulation system microprocessor. Two-phase power conversion is a marked departure from earlier single-phase converter configurations to meet the increasing current demands of modern ...

Read more
  • 2022-09-24 23:33:15
HA16150P-Switching Power Supply Controller

The HA16150 is a dual-output push-pull high-speed current-mode PWM control IC suitable for the control of highreliability, high efficiency, high mounting density isolated DC-DC converters and high-output AC-DC converters. The HA16150 can be used in a variety of applications including push-pull converters, half bridge, doubleforward and single forward applications. The HA16150...

Read more