The OPA2990 high voltage (40 V) general purpose op amp offers excellent DC accuracy and AC performance, including rail-to-rail input and output, low offset voltage (±300μV typ), and low offset drift (±0.6μV/°C typ). The OPA2990 device features differential and common-mode input voltage ranges for the supply rails, high short-circuit current (±80 mA), high slew rate (4.5 V/μ...
Read more
The DRV8876 flexible motor driver is designed for a variety of end applications. These devices integrate an N-channel H-bridge, charge pump regulator, current sense and regulation, current proportional output, and protection circuitry. The charge pump improves efficiency by allowing high-side and low-side N-channel MOSFETs and 100% duty cycle support. These devices use pin-to-pin, ...
Read more
The XM3 power module platform was developed to maximize the benefits of silicon carbide while keeping module and system designs robust, simple and cost-effective. At half the weight and volume of standard 62 mm modules, the XM3 power module maximizes power density while minimizing loop inductance and enabling a simple power bus. The XM3's SiC-optimized package enables continuous ope...
Read more
The OPA4325 precision low-voltage complementary metal-oxide-semiconductor (CMOS) op amp is optimized for ultralow noise and wide bandwidth while operating at a low quiescent current of 650 μA. The OPA4325 employs a linear input stage with zero crossover distortion and has an excellent common-mode rejection ratio (CMRR) of typically 114dB over the full input range. This input co...
Read more
The ME240 is a high-performance AC-DC external power supply series designed for next-generation medical applications. One of the most important aspects of medical power supplies is safety certification. These models are certified to EN/IEC/UL60601-1 3rd edition isolation level to meet 2xMOPP requirements. In addition, these products are designed to comply with UL/EN/IEC...
Read more
The TLV9302 40 V, cost-optimized op amp offers robust general-purpose DC and AC specifications, including rail-to-rail output, low offset voltage (±0.5 mV typ), low offset drift (±2 μV/°C typ), and 1 MHz bandwidth . The op amp devices feature a wide differential input voltage range, high output current (±60 mA), and high slew rate (3 V/µs), making them ideal for high-voltage...
Read more
The USB Type-C Development Kit provides users with a complete solution to understand, extend and simulate the possibilities through USB Type-C. The kit supports power output from SOURCE to SINK up to 100 W and works seamlessly with existing USB hosts. The USB Type-C connector enhances ease of use for connecting USB devices, with a focus on minimizing user confu...
Read more
The PTS636 series touch switches are available in a small size (6.0 mm x 3.5 mm) in an SMT version. Their three heights and four available actuation forces are ideal for general purpose applications. They include ground pin options in 2.5 mm height versions. Previously, the PTS635 and its very limited product models were C&K's only 6.0mm x 3.5mm styles. However, they are now ex...
Read more
The XBee Multi Programmer is a combination of hardware and software that allows users to program multiple Digi Radio Frequency (RF) devices simultaneously. It provides a quick and easy way to prepare devices for release or deployment into large networks. It is a closed hardware component that allows users to program up to six RF devices at a time with the help of six external XBee ...
Read more
Screwless terminal block connector blocks are available in blue and gray, and are available in horizontal and 45-degree orientations. These versatile terminal blocks are available in wire gauges from 24 AWG to 18 AWG and are available in 2.54 mm, 3.5 mm, 3.81 mm and 5 mm pitches. With an operating temperature range of -40°C to +105°C, CUI's screwless terminal block connectors a...
Read more
The LXRW series of ultra-small variable capacitors make implementing and tuning NFC antennas easier than ever. Using an auto-tuning feature, it adjusts the tolerances of the circuit matching components and limits the current flow when metal enters the NFC antenna field. This provides users with better performance with repeatable and consistent results. Markets include telecom, mobile...
Read more