• 2022-09-24 23:23:06

BA00BC0WF is a PNP output LDO voltage regulator IC with an output current of 0.5A and ±2% voltage accuracy. The output voltage is programmable (1.5V to 12V) with external resistors. Overcurrent protection short circuit and thermal protection circuits are established to prevent IC damage and thermal decomposition short. Features 1) Maximum output current: 0.5A 2) The outpu...

• 2022-09-24 23:23:06

BA T/FP series are fixed positive output low dropout, 3 pin voltage regulators with positive output. These regulators are used to provide stable output voltages that fluctuate from DC input voltages. There are 10 fixed output voltages as follows: 3V products, 3.3V, 5V, 6V*, 7V, 8V, 9V, 10V, 12V and 15V. The maximum current capability is 1A for each of the above voltages. (Ite...

• 2022-09-24 23:23:06

The BA178! T and BA178! FP series are 3pin fixed positive output voltage regulators. These regulators are used to provide a stable output voltage from fluctuations in the DC input voltage. There are 11 fixed output voltages, as follows: 5V or 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, and 24V. The highest current capacity is 1A for each of the above voltages. Application of...

• 2022-09-24 23:23:06

Overview The AN78xxNSP series are 3-pin fixed positive output monolithic voltage regulators mounted in a surface mount package. Fixed output voltage stabilization, derived from unstable DC input voltage with minimal use of external components. 9 fixed output voltage types available; 5 volts, 6 volts, 7 volts, 8 volts, 9 volts, 10 volts, 12 volts, 15 volts and 18 volts can be widely used ...

• 2022-09-24 23:23:06

The IRU1117-18 is a low dropout three terminal fixed output regulator with a minimum output current capability of 800mA. This product is designed to provide a good regulated supply for low voltage IC applications and will provide a clock supply for PC applications. The IRU1117-18 is guaranteed to have a full

• 2022-09-24 23:23:06

The ISL6405 is a highly integrated voltage regulator and interface IC, designed for powering control signals from advanced satellite set-top boxes (STBs) to low noise block two antenna (LNB) module ports. The device is comprised of two independent currentmode boosted PWM and two low noise linear regulators along with 22kHz tone generation with the required circuitry, modulation an...

• 2022-09-24 23:23:06

Overview The HT75XX-1 series are three terminal high current collector low voltage regulators implemented in CMOS technology. They can provide 100mA of output current and allow input voltages as high as 24V. They are available with several fixed output voltages ranging from 3.0V to 5.0V. CMOS technology ensures low voltage drop and low quiescent current. Although primarily des...

• 2022-09-24 23:23:06

Overview The HT74XX series are three terminal high current high voltage regulators implemented in CMOS technology. They can supply 100mA output current and allow input voltages as high as 24V. They are available with several fixed output voltages ranging from 2.4V to 15V. CMOS technology ensures low voltage drop and low quiescent current. Although designed primarily as fixed v...

• 2022-09-24 23:23:06

Overview The MIC5205 is an efficient linear regulator with ultra-low noise output, very low dropout voltage (typically 17mV at light load and 165mV at 150mA), and very low ground current (600µA at 100mA output). The MIC5205 provides better than 1% initial accuracy. Especially designed for handheld, battery-operated devices, the MIC5205 includes a CMOS or TTL compatible en...

• 2022-09-24 23:23:06

The ICL7663S Super Programmable Micro Voltage Regulator is a low power, high efficiency positive voltage regulator accepting 1.6V to 16V input and providing adjustable output from 1.3V to 16V when up to 40mA. This is a direct replacement for the industry standard ICL7663B offering wider operating voltage and temperature ranges, improved output accuracy (ICL7663SA), better ...

• 2022-09-24 23:23:06

Overview The ILC7071 is a 100mA, low noise, low dropout (LDO) linear regulator, designed and fabricated using CMOS technology. This process combines the best CMOS features with low quiescent current, small size and low dropout voltage along with high ripple rejection, low bipolar characteristics for best noise and power handling capabilities. The ILC7071 provides less than 10...