The BA178M! T and BA178M! FP series 3-pin, fixed positive output voltage regulator. These regulators are used to provide a stable output voltage from fluctuations in the DC input voltage. There are 11 fixed output voltages as follows: 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, and 24V. The maximum current capacity is 0.5A for each of the above voltages. Application co...
Read more
The BA LBSG (ie “indicated output voltage value) low saturation linear regulator IC adopts this SMP5 (2916 pack) ultra-small package die. Equipped with power saving features that reduce current consumption, it also offers excellent ripple rejection and other features and is ideal for other compact phones used in cellular phones. Applications Residential/Industrial Equipment Cell...
Read more
Product Description The CLM2931 is an active low power voltage regulator. This device is ideal in battery powered applications such as cordless phones, radio control systems and portable computers. The CLM2931 features very low quiescent current (0.4mA) and very low output voltage drop (typically 300mV and 50mV at light loads of 100mA). Additional features include an on/off input t...
Read more
Features • Isolation hermetically sealed package, JEDEC TO -257AA package • Reference voltage set to ±2% • Built-in thermal overload protection • Short circuit current limit Description These three terminals provide positive regulator-sealed isolation in a metal TO-257 package. All protection features are designed to include thermal shutdown circuitry, current limiting and ...
Read more
While the CS5201-1's linear regulator provides an output 1A voltage with an accuracy of ±1%. The device uses two external resistors to set the output voltage in the 1.25V to 5.5V range. This regulator is suitable for use as a post regulator and for microprocessor supply. Fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation ...
Read more
While the CS52015-3 linear regulator provides 1.5A at 3.3V, the output voltage accuracy is ±1.5%. This regulator is suitable for use with post-regulator and microprocessor supplies. Fast loop response, low dropout voltage regulators are ideal for this application where low voltage operation and good transient response are important. The circuit is designed to work with a voltage drop less...
Read more
While the CS5205-2 linear regulator provides 5.0 V with an A@1.5 accuracy of ±2.0%. This regulator is suitable for use as an active termination on the GTL bus based on Intel motherboards. Fast loop response and low dropout make these applications ideal for regulators where low voltage operation and good transient response are significant. The circuit is designed to operate with a drop...
Read more
This fixed voltage monolithic integrated circuit series voltage regulator is designed for a wide range of applications. These applications include card conditioning to distribute noise and eliminate problems with single-point regulation. In addition, they can also use power pass elements to enable high current voltage regulators. Each of these regulators can deliver up to 100mA of output curr...
Read more
Product Description The AS2431L is a three-terminal adjustable shunt regulator providing an extremely low operating current of 100µA with a highly accurate 0.5% bandgap reference. The AS2431L acts as a reference open error amplifier with 2.5V temperature compensation. The thermal stability, broad operating current (100mA) and temperature range (105°C) of the AS2431L make it sui...
Read more
Product Description The AS2830 is a low power 3A adjustable and fixed voltage regulator which is very easy to use. It only requires 2 to external resistors to set the output voltage of the adjustable version. The AS2830 is designed for low voltage applications, providing lower dropout voltage and faster transient response. This device is ideal for powering applications using low voltage...
Read more
The BA LBSG (ie LBSG Indicated Output Voltage Value) is a low saturation linear regulator IC using the ultra-mini SMP5 (2916 pack) die package. Equipped with power saving features that reduce current consumption, it also provides excellent ripple rejection and features ideal for use in cellular phones and others. Power supply for residential/industrial equipment such as CDM...
Read more