describe CS2001 is an intelligent power ASIC for airbag systems used in automobiles. It contains a current mode switching regulator with a 1.2 A on-chip switch and a 5.0 volt, 100 mA linear regulator. The ESR of the linear output capacitor must be in the greater range of MF or 3.3100 mW If the ESR capped to 1.0 watt is less than 100 mW, a series resistor must be used. The swi...
Read more
DESCRIPTION The CS5111 is a dual output power integrated circuit. It contains a 5V±2%, 100mA linear regulator, watchdog timer, linear output voltage monitor to provide power-on reset (POR) and a 1.4A current mode PWM switching regulator. The 5V linear regulator is composed of an error amplifier, reference and supervisory functions. It has low internal supply current con...
Read more
Description The CS5112 is a dual output power integrated circuit. This contains a 5.0 V ± 2%, 100 mA linear regulator, watchdog timer, linear output voltage monitoring provides a power-on reset (POR) and a 1.4 A current mode PWM switching regulator. The 5.0 V linear regulator is composed of an error amplifier, ref, and supervisory functions. It features low internal supply curren...
Read more
illustrate FAN5038 provides a complete low-cost power system for DSP and other loads that require high performance. The FAN5038 combines an adjustable switch-mode DC-DC converter, a low-dropout linear regulator as the core power source for I/O power supplies in a space-saving SO-16 package. Simple external circuitry provides power sequencing and independent current limiting. An...
Read more
Introduction The UT54LVDS031 Quad Driver is a quad CMOS differential line driver designed for applications requiring ultra-low power consumption and high data rates. The device is designed to support data transfer rates over 155.5 Mbps (77.7 MHz) using Low Voltage Differential Signaling (LVDS) technology. The UT54LVDS031 accepts TTL input levels and translates t...
Read more
feature >155.5 Mbps (77.7 MHz) switching rate +340 mV differential signal nominal to 5 V supply TTL Compatible Input Ultra Low Power CMOS Technology Max 5.0ns, Propagation Delay 3.0ns maximum, differential offset radiation hardened design, total dose radiation tested to MIL-STD-883 Method 1019 - Total doses: 300 krad (Si) and 1Mrad (Si) - Atresia immunity (>111 Me...
Read more
General Description The LM134/LM234/LM334 are 3-terminal adjustable current sources with a 10000:1 operating current range, excellent current regulation voltage and a wide dynamic range of 1V to 40V. Currently an external resistor is built and nowhere else is required. Initial current accuracy ±3%. It is true that the LM134/LM234/LM334 floating current sources do not have sepa...
Read more
General Description The LM134/LM234/LM334 are 3-terminal adjustable current sources with a 10000:1 operating current range, excellent current regulation voltage and a wide dynamic range of 1V to 40V. Currently an external resistor is built and nowhere else is required. Initial current accuracy ±3%. It is true that the LM134/LM234/LM334 floating current sources do not have sepa...
Read more
The REF200 construction is described by combining two 100mA current sources and current mirrors in a short-circuit block on a single chip. These sections are medium isolated, making them completely independent. Furthermore, as current sources are twoterminal devices, they can also be used as current sinks. The performance of each section is individually measured and laser trimmed to achiev...
Read more
Describe the features of the LM134/LM234/LM334 that are 3-terminal adjustable current sources: -10000 operatingcurrent range: 1 - an excellent current regulation - Wide dynamic voltage range from 1V to 40V is present by an external resistor without the need for other external components. Currents with reverse voltages up to 20V will only draw a few microamps. This makes the circuit to...
Read more
Overview The ADP3025 is a high efficiency, dual synchronous step-down switching regulator controller optimized for converting battery or adapter inputs to the supply voltages required for portable products and industrial systems. The oscillator frequency can be programmed for 200 kHz or 300 kHz operation, and can also be synchronized to an external clock signal up to 350 kHz. The supplie...
Read more