• 2022-09-24 23:23:06

Description The ILC7080/81 is a 50 or 100mA low dropout (LDO) designed to provide a high performance voltage regulator to address low power systems. These devices have the typical combination of low dropout, low quiescent current CMOS parts are expected, while the only regulators that offer the low noise, high ripple rejection typically associated with bipolar LDOs. These devices...

• 2022-09-24 23:23:06

Description The IP117M series are three-terminal adjustable positive regulators at 0.5A providing an output range capable of excess 1.25V to 60V. These regulators are very easy to use and only require two external resistors to set the output voltage. In addition to improved line and load regulation, a great feature of the "A" series is the initial output voltage tolerance, which is guar...

• 2022-09-24 23:23:06

illustrate HA17800V series positive output 1 A three-terminal voltage regulator IC. Its characteristics are as follows: It is designed to adapt to the power supply of various equipment and to stabilize the voltage of the multi-switching regulator and the control equipment class of the power supply part. Features High ripple rejection ratio up to high frequency (F20kHz): 60dB (in the c...

• 2022-09-24 23:23:06

Describe the HA178L00 series three-terminal fixed output voltage regulator. Not only can be used as stabilized power supplies, but also as zener diodes because of their small outline package. Features Maximum output current: 150mA (TJ = 25°C) ·Maximum power consumption: 800mW ·Overcurrent protection ·Temperature protection circuit

• 2022-09-24 23:23:06

Intersil's decaps help stabilize power systems during severe voltage transients. It achieves this by supplying current when the voltage is lower than 1% or sinking current when the voltage is higher than 1.5% of the average load voltage. The fast transient response of the decap can compensate for the slow response time of many switching DC-DC converters. Although the HIP6200 serves ...

• 2022-09-24 23:23:06

Either an HIP6500 HIP6020 or HIP6021 complements the ACPI-compliant design for microprocessor and computer applications. The IC integrates two linear controllers and two regulators, switching, monitoring and control functions into a 20-pin SOIC package. A linear controller generates a 3.3VDUAL output voltage from the ATX power supply's 5VSB output voltage to po...

• 2022-09-24 23:23:06

Hardened HS-117RH Radiation is an actively regulated voltage linear regulator capable of operating up to 40VDC. This voltage is adjusted from 1.2V to 37V with two external resistors. The device can be sourced from 50mA to 1.25APEAK (minutes). Protection is provided by on-chip thermal shutdown and output current limit circuitry. Intersil's HS-117RH has the advantage ove...

• 2022-09-24 23:23:06

Features · Low power consumption · Low voltage drop · Low temperature coefficient · Wide operating voltage (12V max) · To-92 and SOT-89 packages Applications Battery powered equipment Communication equipment Audio/video equipment Overview The HT10XX series are three-terminal low-set power regulators implemented in CMOS technology. They are available with several fixed...

• 2022-09-24 23:23:06

The MC33253 is a complete bridge driver including an integrated charge pump, two independent high-side and low-side driver channels. The high- and low-side drivers include a cross-conduction suppression circuit that, if enabled, prevents external power FETs at the same time. The driver output is capable of sourcing and sinking a peak-to-pulse current. The lower channel is the reference gr...

• 2022-09-24 23:23:06

The 33887 is a monolithic H-bridge power IC with load current feedback function ideal for closed loop DC motor control. The IC integrates internal control logic, charge pump, gate driver, low RDS(ON) MOSFET output circuit. The 33887 is able to control continuous inductive loads with DC load currents up to 5.0 A, and positive outputs with peak current limits between 5.2 and ...

• 2022-09-24 23:23:06

General Description The MIC5022 Half-Bridge MOSFET Driver is designed to operate up to 100kHz (2% to 5kHz PWM 100% duty cycle) and is an ideal choice for high speed applications such as motor control and SMPS (Switch Mode Power Supplies). A current source sinks a pulse-to-pulse OR gate output on the input resulting in a rising or falling edge. This output current pu...