Explanation WM8510 is a low -power, high -quality single -channel codec used for the Internet voice protocol (VOIP) And digital phone. The device integrates a fake difference and a single -end input (handheld microphone and speaker microphone) and driver including speakers or headphones, and single -line output, making it an ideal choice for telephone design. The external comp...
Read more
Features AD5544 Tel: 16 -bit resolution; the entrance is ± 1 lsb (level B); AD5554 Tel: 14 -bit resolution; minimum effectiveness Bit ± 0.5 (level B); 2 mAh full-standard current ± 20%, VREF ± 10 V; 0.9 μS precipitation time to ± 0.1%; Zero-scale reset; 4 independent 4-quadrant multiplication reference input; SPI compatibility, 3-line interface; dual-cushioning ...
Read more
Features USB 1.1 signal exchange compatible; -3 decibel bandwidth, 150 MMC; miniature 10 lead LFCSP and MSOP packaging, 10-ball WLCSP packaging; single power supply 1.8 V to 5.5 V operation; ; 2.5Ω typical value; maximum 3.45Ω at 85 ° C; typical power consumption: lt; 0.1μW. Application USB 1.1 signal switching circuit; mobile phone; PDA system; MP3 p...
Read more
Feature description 2 Ina149 is a precise unit gain poor Common -mode voltage range: ± 75 v High input co -module large device ] The minimum co-mode suppression ratio: 90 decibels, the voltage range is -40 ° C to+125 ° C. It is a single-chip device DC specifications: including a precision operational amplifier and an integrated thin piece-to maximum offset voltage: 1100 μV...
Read more
Features Wide input voltage range: 2.2V – 5.5V at 500 mAh, 230mv very low voltage drop [ [ [ [ [ [ 123] Under 1A load, 500mv extremely low voltage drop Very low static current (IQ): Typical value is 125 Weian #8226 ; Available output voltage range: 0.8V to 5.0V Very fast transient response high PSRR Accurate voltage adjustment current...
Read more
ISL6522 The DC-DC converter optimized for the application of high-performance microprocessors. It is designed to drive the MOSFET in the synchronous rectification buck topology of N -channel. This ISL6522 integrates all control and output adjustments, monitoring and protection functions integrated in a software package. The output voltage of the converter can be accurately ...
Read more
Explanation As a member of the Swift DC/DC regulator family, TPS54310 Low input voltage high output current synchronous buck-pwm converter integrated the required source of active source element. Including the characteristics listed on the substrate are real, high -performance, providing high -performance voltage errors under the conditions of the large -state is under transient ...
Read more
The second generation Topswitch The II series is more cost -effective than the first generation of the topswitch series and provides some enhanced features. The TOPSWITCH II series will expand the power range of 100/115/230 input input from 100 watts to 150 watts, and the power range of 85-265 volt integrated input is expanded from 50 watts to 90 watts. This brings the advanta...
Read more
Features Vehicle recognition number range: 2.7 volts to 5.5 volts 300 mia LDO current output 300 mAh 400 millico LDO output voltage High output accuracy:? 1.5% Quick LDO line/load transient response 400 mAh, 96%efficiency antihypertensive converter #8226 : 25 Weian empty static current of the steps of the transformer Turn off the current lt; ...
Read more
Features Wide input voltage range: 3.6 V to 30 V; reconciliation (3.3 V, 5 V) output options integrated 1 A power switch; use small surface paste components to limit flow; peak values; peak values value; peak value Entering voltage (100 ms): 60 V; can be configured to be buck, buck boost, and sepic regulator; provides 8 lead SOIC packaging; ADISIMPOWER supports #8482; ...
Read more
ISL6567 two-phase synchronization buck-pwm control chip is the load point and other needs to be efficient and compact. Whether the multi -phase power conversion is obviously deviated from a single -phase variable device to meet the requirements of the configuration of various electronic lines that increase the current. By dividing the power supply and load current, the multi -phase implement...
Read more