• 2022-09-23 09:58:45

Summary High-performance signal processor for communications, graphics and imaging applications; super Harvard architecture; four independent buses for dual data fetch, instruction; fetch and non-intrusive I/O; 32-bit IEEE floating point arithmetic unit multiplier, ALU and Shifter; Dual Port On-Chip SRAM and Integrated I/O Peripherals-a; Complete System-on-Chip; Integr...

• 2022-09-23 09:58:45

Intersil ICL32XE devices are 3.0V to 5.5V compliant with ElA/TIA-232 and V.28/V.24 specifications, even at VCC=3.0V. Additionally, ±15kV ESD protection (IEC61000-4-2 air gap and Human Body Model) is provided on the transmitter output and receiver input ( RS-232 pins). Target applications are PDAs, PDAs, notebooks and notebooks where low running, even lower s...

• 2022-09-23 09:58:45

1 Features 1 output swing includes two supply rails Low noise: 9 nV/√Hz, typical frequency f=1 kHz Low Input Bias Current: 1-pA typical Fully specified for single-supply and split-supply operation The common mode input voltage range includes negative rail High Gain Bandwidth: 2.2 MHz typical High slew rate: 3.6 V/μs typical Low input offset voltage: 950μV max TA=25°C in...

• 2022-09-23 09:58:45

Optimized for Offline and DC-to-DC converter Low startup current (

• 2022-09-23 09:58:45

Summary High-performance 32-bit digital signal processor for audio, medical, military, graphics, imaging, and communications; Super Harvard architecture—4 independent buses for dual data fetch, instruction fetch and non-intrusive, zero-overhead I/ O; Backward compatible assembly source code level compatible with ADSP-2106x DSPs; single instruction, multiple data (SIMD) computing...

• 2022-09-23 09:58:45

The Intersil ISL4311X are high precision, high performance analog devices fully specified for 3.3V, 5V and 12V switching operation with improved leakage, Icc and switching function time specifications. Designed to operate from a single +2.4V to +12V supply Low supply current (temperature and voltage range) and low leakage current (1nA) make these switches ideal for battery powered a...

• 2022-09-23 09:58:45

Low-cost multi-chemical battery charge and discharge control ISL6251 , ISL6251A are highly integrated battery Li-Ion/Li-Ion polymer battery charger controllers for NiMH batteries. High efficiency is achieved through the use of synchronous buck topology and MOSFETs, instead of diodes, for slave adapters or batteries. Low-side MOSFETs mimic light-emitting diodes to impro...

• 2022-09-23 09:58:45

feature Initial Accuracy: ±0.1% (max); Maximum Temperature Coefficient: 8ppm/°C; Operating Temperature Range: -40°C to +125°C Output Current: +10mA Source/-3mA Sink Low Quiescent Current: 100µA (max); Low Dropout: 250mV at 2mA; Output Noise (0.1 Hz to 10 Hz):

• 2022-09-23 09:58:45

feature 2.7-V to 20-V operation pin package Requires minimal number of external components Compatible with existing power supply designs that include remote outputs Voltage sensor Differential Shared Bus Precision Current Sense Amplifier (Gain of 40) Undervoltage lockout circuit User Programmable Shared Loop Compensation application Parallel power supply illustrate The UC390...

• 2022-09-23 09:58:45

UC2842A /3A/4A/5A standard high performance current mode PWM controller . Edge Cut Oscillator Discharge Current . Current Mode Operation to 500kHz . Automatic feedforward compensation . Cycle-by-cycle lock PWM Limiting . Internally trimmed references undervoltage lockout . High current totem pole output . Undervoltage Lockout with Hysteresis . Low startup current (

• 2022-09-23 09:58:45

Features • ±250 mV input voltage range optimized with parallel resistors • Very low nonlinearity: 0.075% max at 5 V • Low offset error: 1.5 mV max • Low noise: 3.1 mVRMS typical • Low and high side supply current: 8mA max at 5V • Input bandwidth: 60 kHz min • Fixed gain: 8 (0.5% accuracy) • High CMRR: 108dB • Low side operation: 3.3 V • Certified Galvanic Iso...