• 2022-09-23 11:41:16

The ADS8329/30 are high speed, low power, successive approximation register (SAR) analog-to-digital converters (ADCs) using an external reference. The architecture is based on charge redistribution, which inherently includes a sample/hold function. The ADS8329/30 has an internal clock for running conversions, but can also be programmed to run conversions based on the external serial...

• 2022-09-23 11:41:16

feature High Speed: 50mhz unity gain bandwidth; 350 V/s slew rate; 70 ns settling time to 0.01% 50 mA; specified for +5 V, 5 V, and 15 V operation; 2.0 V PP output swings into 150 load; (Vs = +5 V); good video performance; differential gain and phase errors of 0.07% and 0.11 Excellent DC performance:; 2.0 mV maximum input offset voltage. Applications: unity-gain ADC/DAC buff...

• 2022-09-23 11:41:16

The ISL29030A is a built-in IR led driver and i2c optical-to-digital converter interface (compatible with SMBus) that integrates ambient and IR. This device uses two separate ADCs that measure ambient light simultaneously and in parallel proximity. The flexible interrupt scheme is designed for use with the smallest microcontrollers. For ambient light sensor (ALS) data conversi...

• 2022-09-23 11:41:16

Features: Industry Standard Pins with Enable Input 4.5 to 18V Operating Range 11.4a Peak Notch at VDD=12V 9.7A Sink/7.1A Source, Vout=6V Inverted Configuration (FAN3121) and Non-Inverted Configuration (FAN3122) Internal resistor shuts down driver if no input 23ns/19ns typical rise/fall time under 10nF load 20ns typical propagation delay time Choice of TTL or C...

• 2022-09-23 11:41:16

describe The YD1028 is an integrated Class B dual output amplifier in a 9-wire single in-line (TO220Z9) plastic power package. The device was primarily developed for automotive radio applications. Features * Few external components required for bridge-to-load (BTL), stereo or BTL applications; * High output power, fixed gain, good ripple rejection; * Same input (inverting and no...

• 2022-09-23 11:41:16

Description YB1519 is a high power boost converter. An adjustable current limit, wide range of input voltages, and switching voltages up to 40V are designed to drive white LED backlights for large LCD panels. It can drive up to 10 LEDs in series or 18 LEDs in parallel/series. The wide range of applications makes the YB1519 suitable for many types of battery applications such a...

• 2022-09-23 11:41:16

feature: 10 MHz to 300 MHz input frequency; 6.8 kHz to 270 kHz output signal bandwidth; 7.5dB single-sideband noise figure (SSB NF); 7.0 dBm input third-order intercept (IIP3); AGC free range up to -34 dBm 12 dB continuous AGC range; 16dB front-end attenuator; baseband I/Q 16-bit (or 24-bit) serial digital output; lo and sample clock synthesizer; programmable decimation ...

• 2022-09-23 11:41:16

describe The FOD2743 opto-isolated amplifier consists of the popular KA431 precision programmable shunt reference and optocoupler. An optocoupler is a light-emitting diode that optically couples gallium arsenide (gaas) to a silicon phototransistor. 1/3 reference voltage tolerance classes = 2%, 1% and 0.5%. The current transfer ratio (CTR) is between 50% and 100 %. It also has an outsta...

• 2022-09-23 11:41:16

feature: Serial digital data link requires few I/O pins; analog input track/hold functionality; 2-, 4-, or 8-channel input multiplexer options with address logic; 0V to 5V analog input range with single 5V supply; no zero-scale or full-scale adjustment required; TTL/CMOS input/output compatible; on-chip 2.6V bandgap reference; 0.3″ standard width 8-, 14-, or 20-pin PDIP packages...

• 2022-09-23 11:41:16

feature Has 1.8 to 5.5V input voltage range Controls turn on 200mA and 400mA current limit options Under voltage lockout Thermal shutdown < 1UA shutdown current Auto restart Player Digital Camera Peripheral Ports Hot Swap Power Supplies Overview The fpf2100 to fpf2107 are a family of load switches that provide comprehensive protection for systems and loads that may experience ...

• 2022-09-23 11:41:16

Linear Current Limit Thermal Shutdown Short Circuit Protection Integrated Fixture Low Current Drawn From Input Pins Diagnostic Feedback Through Input Pins ESD protection goes directly to the gate of the power mosfet (analog drive) Compatible with standard power mosfet description The vnb14nv04, vnd14nv04, vnd14nv04-1 and vns14nv04 are monolithic devices fabricated using s...