The UC1524, UC2524 and UC3524 integrate all functions required for the construction of a regulated power supply, inverter switching regulator in a single chip. They can also be used as control elements for high power output applications. The UC1524 family is designed for either polarity switching regulators, transformer coupled DC-DC converters, transformer voltage doublers and pola...
Read more
The UC1842A/3A/4A/5A family of control ICs are pin-compatible pin-modified versions of the UC3842/3/4/5 family. Providing the necessary functionality to control current-mode switch-mode power supplies, this family has the following improved features. The startup current is guaranteed to be less than 0.5mA. The oscillator discharge is trimmed to 8.3 mA. During undervoltage lockout,...
Read more
The UCC3580 PWM controller family is designed to implement various active clamp/reset and synchronous rectifier, switching converter topologies. While containing all the necessary features for fixed frequency high PWM performance, the additional features of this design include auxiliary switch drivers, complementing the main power switch, and programmable dead time or delay between each...
Read more
Features • New revolutionary high voltage technology • Intrinsic fast recovery body diode • Very low reverse recovery charge • Ultra low gate charge • Extreme dv/dt rating • High peak current capability • Periodic avalanche rating • Qualified for Industrial grade applications according to JEDEC0) • Lead-free lead plating, RoHS compliant
Read more
ATS685LSH-Dual Wire, Zero Speed Differential Gear Tooth Sensor IC Features and Benefits Fully optimized differential digital gear tooth sensor IC • Operating Mode Lock • Unique Algorithm Against Vibration Exacerbation • AGC and Reference Adjustment Circuits • Air Gap Independent Switch Points • Digital Output Profile • Accurate Duty Cycle Over F...
Read more
15000 watt transient voltage suppressor 17 to 280 volts Features ☆ 15000 watt peak pulse power supply 10/1000us capability ☆ waveform ☆ glass passivated junction and plastic packaging equipment ☆ low incremental surge resistance ☆ guaranteed high temperature welding ☆ fast response time Maximum rating Operating temperature: -55℃~ +175℃ Storage temperature: -55℃~+175℃ Minimum 15,000 ...
Read more
The ST890 is a low voltage, P-channel MOSFET for power switching applications with high side switching loads. This switch takes a 2.7V TI5.5V input, ideal for 3V and 5V systems. An internal current limit circuit protects the input supply against overload. Thermal overload protection limits power dissipation and junction temperature. The highest required current limit for the S...
Read more
The TDE1707 is a 0.5A integrated power switch capable of supplying up to 48V. Two output configurations are possible: - Loaded to GND. (high side mode) - Loaded to VS (low side mode) especially dedicated to proximity detectors, its internal +5 V supply can be used for external supply circuits (see also AN495/0692). Internally is a signal generating block signal that prevents the ...
Read more
Features • Overload Protection • Short Circuit Protection • Cascaded Serial Diagnostic Interface • Over Voltage Protection • MC Compatible Inputs • Electrostatic Discharge (ESD) Protection The quad low-side switch features four independent Smart Power Technology (SPT) active-low input stages and four open-drain DMOS output stages. The TLE5216G has embed...
Read more
UC37131, UC37132 and UC37133 are a family of smart power switches that can drive resistive or inductive loads or high-low. The UC37132 is available in a 14-pin (DIP), 16-pin package (SOIC), or 20-pin (CLCC) package and can accommodate low-side (loaded to VCC) or high-side (loaded to GND) configurations. The UC37131 and UC37133 are exclusively available in a low or hi...
Read more
The VN410 is a monolithic device proposed using the SGS-Thomson Vertical Smart Power Technology, integrating all the functions required to implement a complete automotive flashing system. The device has two identical power supply channels so that only one of the information is specified. RT, CT pins are connected to external R, C network to fix flicker frequency. LDIR, RDI...
Read more