The IR1210 is a low voltage, high speed power MOSFET and IGBT driver. Proprietary latch-immune CMOS technology allows rugged monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL outputs. The output driver is equipped with a high pulse current buffer stage designed for minimum driver transconductance. Propagating delay matching between the t...
Read more
The MIC2025 and MIC2075 high-side MOSFET switching general-purpose power supply requirements distribute optimized protection circuits. The MIC2025/75 are internally current limited and have thermal shutdown protection for the device and load. The MIC2075 provides "smart" current consumption that reduces thermal shutdown in fault mode. When a thermal shutdown fault occurs, the...
Read more
The MIC2026 and MIC2076 high-side MOSFET switching general-purpose power supply requirements distribute optimized protection circuits. The MIC2026/76 are internally current limited and have thermal shutdown protection for the device and load. The MIC2076 provides "smart" thermal shutdown, reducing current consumption in fault mode. When thermal shutdown fails, the output latc...
Read more
The MIC2027 and MIC2077 are quad high-side MOSFETs optimized for general purpose power distribution switches requiring protection circuits. The MIC2027/77 are internally current limited and have thermal shutdown to protect the device and load. The MIC2077 provides "smart" thermal shutdown, reducing current consumption in fault mode. When thermal shutdown fails, the output lat...
Read more
The RC5060 is a Camino ACPI switch controller for the Whitney and Tieheimer platform. It is controlled by PWROK, SLP_S3# and SLP_S5#, and provides PCI, 3.3V, 3.3V dual SDRAM, 2.5V dual Rambus and 5V dual voltage. An on-board high precision low TC reference enables precise tolerance voltage regulation without expensive external components. The RC5060 also ...
Read more
The TPS201x home power distribution switches are intended for applications with high capacitive loads and short circuits may be encountered. The high-side switch is a 95 MW N-channel MOSFET. Gate drivers are provided by internal drivers and charge pumps designed to control the rise and fall times of the power switch to minimize current surges during switching. The charge pump opera...
Read more
The TPS2043 and TPS2053 triple power distribution switches are used in applications where high capacitive loads and short circuits may be encountered. The TPS2043 and TPS2053 three 135 MW N-channel MOSFET high-side power switches are integrated in a single package power distribution system, which requires multiple power switches. Each switch is controlled by logic, making t...
Read more
The ADM1072 is a logic controlled, dual P-channel switch with low resistance and a built-in current limiter, capable of sourcing supply voltages from 2.7V up to 1A5.5V. In addition, each channel toggles logic input on and off, the device has a spare input, and the output toggles current limit, making it ideal for use with USB peripherals. The output current in normal operating mode an...
Read more
The monolithic integrated circuit contains all the necessary monitoring functions to control the output of a complex power system. Overvoltage (OV) sensing is provided to trigger an external SCR to "skid" shutdown, an undervoltage (UV) circuit can be used to monitor output or sample voltages at the input; and a third op amp/comparator is available for current sensing (CL ) all contained...
Read more
The X40010/11/14/15 combines power-on reset control, watchdog timer, supply voltage monitoring, and secondary voltage monitoring, in one package. This combination reduces system cost, reduces board space requirements, and increases reliability. Applying a voltage to the VCC supply activates the power-on reset circuit to hold the reset/reset active period time. This allows the power supply ...
Read more
The ZM33164-3 is the next three-terminal volume tago monitoring circuit using a microprocessor system. The threshold voltage of the device has been set to 2.68 volts making it ideal for 3 volt circuits. The device includes an accurate voltage reference and a built-in comparison hysteresis to prevent misoperation. "Open collector output ZM33164-3 features capable of sinking at least l0mA r...
Read more