• 2022-09-23 12:45:58

Overview The W83301R is an ACPI compliant controller for microprocessors and other computer applications. In essence, this part can mainly operate Mode A and B in alternate configurations – Mode A provides switch controller to generate 5Vdl from ATX power supply, linear controller – str1 (2.5Vdual) and bus terminator controller – 1.25 Vdual , for high-speed buses such as RD...

• 2022-09-23 12:45:58

The BA3308F /FV is a dual preamplifier for recording and playback ALC (Automatic Level Control), specially developed for stereo radios, recorders, recorders and other preamplifier audio applications. ALC circuit has built-in rectifier circuit with wide adjustable dynamic range, high gain, low distortion amplifier direct coupling and mute circuit to cut off popping sound when power i...

• 2022-09-23 12:45:58

The FIN12AC is a 12-bit serializer capable of operating for a parallel frequency range between 5MHz and 56MHz. The control of S1 and S2 selected in this frequency range is excellent. Bidirectional data flow is controlled through the use of a directional (DIRI) control pin. The device can be configured to operate on the DIRI pin in unidirectional mode only by hardwiring. An ...

• 2022-09-23 12:45:58

The CC1150 is a true single-chip UHF transmitter designed for ultra-low power wireless applications. This circuit is primarily intended for use in the ISM (Industrial, Scientific and Medical) and SRD (Short Range Devices) 315- , 433- , 868- and 915-MHz frequency bands, but can be easily programmed to operate in other frequency ranges from 300 to 348 MHz, 400 to 464 MHz and...

• 2022-09-23 12:45:58

The DAC7617 is a quad, serial input, 12-bit, voltage output digital-to-analog converter (DAC), with guar and 12-bit monotonic performance over the -40°C to +85°C temperature range. Asynchronous reset clears all registers with either medium scale (800H) or zero scale (000H), selectable via the RESETSEL pin. The single DAC input is double buffered, enabling simultaneous upd...

• 2022-09-23 12:45:58

General description The Winbond W6630 is a stereo audio DAC chip incorporating 8X digital interlatoin filters, 64x multi-level over sampling delta-sigma modulators, analog low-pass filter and output extensivers. The chip can operate from 2.7 volts to 5.25 volts. Moreover, the 16 or 18 bit linear input data for DAC consistes of two formats, normal format and I2s format. In addition, ...

• 2022-09-23 12:45:58

describe The WT8043 is a silicon monolithic circuit designed for simultaneous signal processing of multiple simultaneous displays, capable of handling a wide variety of PCs and workstations. It can be applied to monitors that support standard IBM VGA, VESA Super VGA and IBM 8514 /A video modes. It can also be used on other high-end monitors that support non-standard video ...

• 2022-09-23 12:45:58

1 Features 1 Short Circuit Protection Offset Voltage Null Capability Large Common Mode and Differential Voltage Range No Frequency Compensation No Latching 2 Apps DVD Burner & Player Pro Audio Mixer 3 Description: The A741 device is a general-purpose operational amplifier with the ability to compensate for the zero position of the voltage. The high common-mode input...

• 2022-09-23 12:45:58

The ADS7841 is a 4-channel, 12-bit sampling analog-to-digital converter (ADC) with a synchronous serial interface. The resolution is programmable to 8-bit or 12-bit with a typical power consumption of 2mW at 200kHz throughput rate and +5V supply. The reference voltage (VREF) can vary between 100mV and VCC, providing a corresponding input voltage range of 0V to VREF. The d...

• 2022-09-23 12:45:58

The EL8102 , EL8103 represent single rail-to-rail amplifiers with a bandwidth of 500MHz and a slew rate of -3dB at 600V/µs. Draining a very low 5.6mA supply current, the EL8102 and EL8103 also have an input, to 0.15V below the VS-rail. The EL8102 includes a quick-acting disable/power-down circuit. With 25ns disable and 200ns enable the EL8102 is ideal for multiplexing appl...

• 2022-09-23 12:45:58

Function description Universal: Configurable as various low-pass, high-pass, low-pass, high-pass and band-pass filters. It uses the classic state variable-bandpass, bandstop analog architecture with an inverting amplifier and two simple design process integrators. The integrator includes an on-chip 1000pF precise frequency and Q: capacitor, trimmed to 0.5%. This structure solves one of the...