• 2022-09-23 12:45:13

Features Very high accuracy: +4.5 V output, ±0.8 mV Very low drift: 1.48 ppm/°C (-55°C to +125 °C) Excellent stability: 6 ppm/1000 hours. Typical Excellent Line Regulation: 6 ppm/v Typical Wide Supply Range: +13.5 to +22.0 V Sealed 14-Pin Ceramic Immersion Reference Resolution Servo System Word Voltmeter Accuracy ISION Test and Measurement Instruments Desc...

• 2022-09-23 12:45:13

The EL7530 is a synchronous integrated FET 600 mA step-down regulator with internal compensation. It has an input voltage range of 2.5V to 5.5V, which can accommodate 3.3V, 5V or Li-Ion battery supply sources. The output can be set externally at 0.8V to VIN with a resistor divider. The EL7530 has automatic PFM/PWM mode control, or only PWM mode. The PWM frequency...

• 2022-09-23 12:45:13

Features Complete PWM Power Control Circuitry Uncommitted Outputs for 200 mA of Sink or Source Current Output Control Selection of Single-Ended or Push-Pull Operation The device provides a stable 5V reference voltage with a 5% tolerance circuit structure allows easy synchronization of applications Desktop PC Microwave Power Supply: AC/DC, Isolated, with PFC, >...

• 2022-09-23 12:45:13

The C8051F320 MCU features an onboard Universal Serial Bus (USB) 2.0 functional controller that integrates a transceiver and on-chip clock recovery. USB applications do not require external resistors, crystals, voltage regulators, EEPROM or other components. The MCU includes a powerful 8051 core with 25 MHz performance and 16 kB Flash, 2.25 kB RAM. On-chip analog ...

• 2022-09-23 12:45:13

The DRV103 is a low-side DMOS power switch with a pulse width modulation (PWM) output. Its robust design is used to drive electromechanical devices such as optimized valves, solenoid valves, relays, actuators, motors, and positioners. The DRV103 is also ideal for driving thermal equipment, as heaters, coolers, and lamps. PWM operation preserves power and reduces heat rise, resul...

• 2022-09-23 12:45:13

Features Description The TPS54325 device is an adaptive real-time d1 d-cap2 mode that enables fast transient cap2 mode synchronous buck converters. The corresponding TPS54325 device enables system designers to have low output ripple and allows the ceramic output to complete a power capacitor bus regulator kit for various end equipment, with a low cost, low component count, low standby cu...

• 2022-09-23 12:45:13

The AD210AN is the latest addition to a new generation of low-end, high-performance isolation amplifiers. This three-port, broadband isolation amplifier is fabricated using surface mount components in an automated assembly process. The AD210AN combines design expertise with state-of-the-art manufacturing techniques to produce extremely compact and economical isolators with excellent per...

• 2022-09-23 12:45:13

The EL7562 is an integrated synchronous buck regulator whose output voltage is adjustable from 1.0V to 3.8V. It is capable of delivering 2A continuous current with up to 95% efficiency. The EL7562 operates in a constant frequency pulse width modulation (PWM) mode, making external synchronization possible. Patented on-chip resistorless current sensing enables current mode control, whi...

• 2022-09-23 12:45:13

0-V input accuracy Zero reading for zero detection, true polarity is 0 1-pa typical input current True differential input Multiplexed binary coded decimal (BCD) output Low rollover error: ±1 count Maximum control signal allowed with UART or Micro Processor interface with TTL-compatible automatic ranging capability for over-range and under-range signals. illustrate The ICL713...

• 2022-09-23 12:45:13

BTS660P is an N-channel vertical power FET with charge pump, current control input and load diagnostic feedback current sense, integrated on Smart SIPMOS chip technology. Provides embedded protection. Intelligent high-side high-current power switch Self-turning through power MOSFET Reverse battery protection Overload protection Current limiting Short circuit protection ...

• 2022-09-23 12:45:13

FSQ0170RNA , FSQ0270RNA, FSQ0370RNA include an integrated current mode pulse width modulator (PWM) and avalanche resistant 700V sense FET. It is specifically designed for high performance off-site switched mode power supplies (SMPS) with minimal external components. Integrated PWM controller features include: a fixed frequency oscillation, under-voltage lockout (U...