• 2022-09-23 12:45:13

Maximum continuous output current 5 V Logic Level Compatible Input Thermal Shutdown Under Voltage Protection Drain Diagnostics Output Fast Demagnetization of Inductive Loads Extremely Low Standby Power Consumption Description side ground. A built-in thermal shutdown protects the chip from over temperature and short circuits. Open-drain diagnostic output indication: open-c...

• 2022-09-23 12:45:13

The CP2101 is a highly integrated USB-to-UART bridge controller that provides a simple solution for updating RS-232 to USB using minimal components and PCB space design. The CP2101 includes a USB2.0 full-speed functional controller, USB transceiver, oscillator, EEPROM and an asynchronous serial data bus (UART) in a compact 5 x 5 mm QFN-28 package with comple...

• 2022-09-23 12:41:07

The 8-bit monolithic digital, analog converter ERS of the DAC08 family provide very high speed performance combined with low cost and outstanding application flexibility. Advanced circuit design achieves a settling time of 85 ns with very low "glitch" energy and at low power consumption. Monotonic multiplication performance is achieved over a wide current range of 20 1 for the reference E...

• 2022-09-23 12:41:07

Description ZXCT1010 is a high voltage side current detection monitor. Using this device eliminates the need to disturb the ground plane when inducing load currents. It is an enhanced version of the ZXCT1009, offering reduced typical output offset and improved accuracy at low inductance voltages. Wide input voltage 20V , as low as 2.5V, suitable for a variety of applications. The mi...

• 2022-09-23 12:41:07

The AD8541 /AD8542/AD8544 are single, dual and quad rail-to-rail input and output, single-supply amplifiers. Low supply current and 1 MHz bandwidth. All are guaranteed to operate from a single 2.7 V supply and a 5 V supply. These devices provide 1MHz bandwidth with low current consumption of 45µA per amplifier The AD8541/AD8542/AD8544 have very low input bias currents. Us...

• 2022-09-23 12:41:07

EL7585A stands for multiple output regulator used in all large panel, TFT-LCD applications. It features a single boost converter integrating a 3.5A FET, two positive LDOs for the VON and V logic generation, and a single negative LDO for the V OFF generation. The boost converter can be programmed to operate in either P-mode or PI-mode to improve load regulation. The...

• 2022-09-23 12:41:07

illustrate The Zr431 is a three-terminal adjustable shunt regulator that provides excellent temperature stability and output current handling capability up to 100mA. By selecting two external divider resistors, the output voltage can be set to any selected voltage between 2.5 and 20 volts. These devices can be used as replacements for Zener diodes in many applications where improved performa...

• 2022-09-23 12:41:07

feature CCD Signal Processing – Correlated Double Sampling (CDS) – Programmable Black Clamp Programmable Gain Amplifier (PGA) ––6-db to 42 db gain range 10-Bit Digital Data Output – Up to 36 MHz Conversion Rate – No Missing Codes 76dB SNR Portable Operation – Low Voltage: 2.7 V to 3.6 V – Low power: 130 mW at 3.0 V (typ.) – Standby Mode: 6 M...

• 2022-09-23 12:41:07

BA5406 /BA5417 is a dual OTL monolithic power supply IC with two built-in high output speaker amplifier circuits. High output When VCC = 12V and RL = 3Ω, it can generate 5W × 2; when VCC = 9V and RL = 3Ω, it can generate 2.8W × 2. The BA5406, which uses a high allowable power dissipation package, has a simple heat sink design. Not only does the BA5417 go beyond b...

• 2022-09-23 12:41:07

The FAN5091 is a synchronous multi-chip DC-DC regulator IC that provides a highly accurate, programmable output voltage for all high performance processors. The two interleaved synchronous buck regulator slices use built-in current sharing ing 180 ° out of phase to provide fast transient response required for high current applications while minimizing external components. The FAN50...

• 2022-09-23 12:41:07

Negative 5-V 200 mA output (VCC≥4.5 4-V to 6.2-V input operating range 78% typical efficiency The 160 kHz fixed frequency current mode pulse width modulation controller en input inhibits operation and reduces supply current to 1 µA. Soft-Start 8-Pin SOIC and DIP Packages -40°C to 85°C Free Air Temperature Range Pin Compatible with MAX73 describe The TPS6735...