feature Full-scale frequency set by external system clock (up to 2 MHz); very low linearity error (0.005% max at 1 MHz fs; 0.02% max at 2 MHz; no critical external components required; accurate 5V reference; Low drift (25 ppm/°C max); dual or single supply operation; voltage or current input; MIL-STD-883 compliant versions available. Product Description The AD652 synchronous ...
Read moreFeatures: Ultra low voltage drop, 0.4V, 3A typ. Remote operation Fast transient response Load regulation: 0.05% typ. 0.5% initial accuracy On-chip thermally limited 5-pin TO-252 DPAK and TO-263 packages Application: Support GTL+ bus power low voltage logic power embedded processor supply faceted regulator 2.5V and 1.8V logic family DDR termination power supply Descriptio...
Read morefeature Two fast 14-bit ADCs ; four input channels; simultaneous sampling and conversion; 5.2 second conversion time; single-supply operation; selection of input ranges; V to 2.5 V; high-speed parallel interface; low power, 70 mW (typ); power-save mode, 105 watts maximum; analog input overvoltage protection; 14-bit lead compatible upgrade to AD7862. application AC motor control; uninter...
Read moreFeatures: Internal Avalanche Rugged FET consumes only 0.65W at 240V AC and 0.3W load Advanced Burst Mode Operation Low EMI Frequency Modulation Accurate Fixed Operating Frequency Internal Startup Circuit Pulse-by-Pulse Current Limiting Overvoltage Protection Overload Protection Internal Thermal Shutdown Function Auto-restart mode Undervoltage lockout Low...
Read more8 bit cid microcontroller The w925e/c240 is a versatile 8-bit microcontroller with extensive Call Identification Delivery (CID) capabilities. The 8-bit CPU core is based on the 8051 series; therefore the instructions are compatible with the 8051 series. The cid part includes fsk decoder, dtmf receiver, CPE* alarm signal (CA) detector and ring detector. Built-in DTMF generator...
Read moreGeneral Instructions W83792AD /AG and W8392D/G are two parts that support single-CPU and dual-CPU applications, the former is for single-CPU applications, providing 1 set of thermal trip and 1 set of VID control; the latter is used for dual-CPU applications, providing dual-CPU VID control and 2 sets of thermal trips. Except thermal trip and VID control number, ot...
Read morefeature -3 dB bandwidth, 2.2 GHz, AV=12 dB; single-resistor programmable gain: 0dB≤AV≤26dB differential interface; low noise input stage 2.7 nV/√Hz, AV=10 dB; low harmonic distortion; -79 dBc seconds, frequency 70 MHz; -81 dBc, third at 70 MHz; oip3 of 31 dBm at 70 MHz; single supply operation: 3 V to 5.5 V Low power consumption: 28 mA at 5 V; adjustable output tota...
Read moreFeatures: Fully integrated single-cell high-efficiency charger Li-Ion and Li-Polymer battery pack power path circuitry ensures fast system startup When VBUS is connected, battery power is less than 1.55 Maximum charge current Float voltage accuracy: ± at -25°C 0.5% - 0 to 125 °C ±1% input and charge current regulation accuracy ±5% Temperature sensing input prevents auto-chargi...
Read moreFeatures Input Voltage: 3.6V to 18V ; Output Voltage: 0.8V to VCC; Output Current: Up to 3A; Duty Cycle: 0% to 99% PWM Control; Oscillation Frequency: Typical 300kHz; Soft-Start, Current Limit, and Enable Features; thermal shutdown function; built-in sw p channel mos; SOP-8L and SOP-8L-DEP: with "green" molding compound (no BR, SB) 8226 ; lead free fin...
Read moreFeatures Burst Mode Operation for Reduced Power Consumption External Pins for Synchronization Wide Operating Frequency Range Up to 130kHz Internal Startup Circuit Low Operating Current (Max: 6mA) Pulse-by-Pulse Current Limit Overload protection (auto-restart mode) Abnormal over-current protection (auto-restart mode) Internal thermal shutdown (auto-restart mode) Unde...
Read moreFeatures Adjustable Switching Frequency Up to 200kHz Current Mode Control Soft-Start and Shutdown Control Automatic Burst Mode Operation Standby Conditions Capable of Meeting "Blue Angel" Standards (
Read more