feature Fast 12-bit adc with 5.9ms conversion time; eight single-ended analog input channels; selection of input ranges: 610 V for AD7890-10 ; 0 V to 14.096 V for AD7890-4; 0 V to 12.5 V for AD7890-2 ; allows separate access to multiplexer and ADC; on-chip track/hold amplifier; on-chip reference; high-speed, flexible, serial interface; single-supply, low-power operation (50 mW max)...
Read moreThe FXLC95000CL Intelligent Motion Sensing Platform three-axis MEMS integrated breakout device accelerometer and 32-bit Coldfire MCU autonomous high-precision sensing solution in an open, simple-to-use, architecture. The fxlc95000cl hardware is user programmable for creating intelligent high precision, flexible, motion sensing platforms. This user's firmware and hardware d...
Read moreThe FLTR75V05 filter module is designed to reduce common mode and differential mode noise on the input or output lines. The high frequency switching power supply module has a maximum current rating of 5 A. It provides high insertion loss across the frequency range specified by the US Federal Communications Commission (FCC) and the International Special Committee on Radio Inte...
Read moreW681360 is a general purpose single channel 13 bit line pcm codec with 2 full and tssop pack options. The main function of the device is digitization and reconstruction. For speech signals, including band limiting and smoothing required by pcm systems. w681360 performance is specified over the industrial temperature range -40°C to +85°C. The W681360 includes an on-chip precision voltage r...
Read moreGeneral Instructions The w83l603g and w83l604g are general purpose input/output integrated circuits with smbustm. The W83L603G model provides 8 GPI/O pins, and the W83L604G provides 14 GPI/O pins. Both W83L603G and W83L604G provide smbustm address setting pins to set the address during power-on reset or external reset. The W83L603G/W83L604G smbustm address is: W83L...
Read morefeature Dual 10-bit, 40 msps, 65 msps, 80 msps, and 105 msps analog-to-digital converters; low power: 275 mW, 105 msec per channel; on-chip reference and track-and-hold; 300 MHz analog bandwidth per channel; signal-to-noise Ratio = 57dB @ 41MHz, Code = 80ms/sec; 1 V PP or 2 V PP analog input range per channel; 3.0 V single-supply operation (2.7 V to 3.6 V); power-down mode for si...
Read moreBuilt-in thermal sensor Brushless DC fan speed control Linear control and regulation of fan speed based on temperature Band automatic green shutdown mode operation Features: Fan Speed Controller Computer and Server Power Supply Telecom Low Cost Ventilation Application: low cost integrated fan speed control 10 mA) FSCTXXA-UH5 is a highly integrated low cost fan speed co...
Read morefeature Precision 2.5V to 5V supply monitor; 7 reset threshold options: 2.19 V to 4.63 V; 140 ms (min) reset timeout; 1.6 second timeout watchdog timer ( ADM823 , ADM824); manual reset input (ADM823) , ADM825); push-pull output stage; reset (ADM823); reset, reset (ADM824/ADM825); low power consumption: 5 µA; reset output guaranteed to be valid for VCC=1 V; power-fai...
Read moreFeatures: 1.8 to 5.5V Input Voltage Range Control Turn On 200MA Current Limit Option Under Voltage Lockout Thermal Shutdown
Read moreGeneral Instructions The W25P80 (8M-bit) and W25P16 (16M-bit) serial flash memory provides a storage solution for systems with limited space, pins, and power. They are ideal for code-downloading applications and for storing voice, text, and data. These devices operate on a 2.7V to 3.6V supply, with current consumption as low as 4mA active and 1 microA off. The device is housed in a...
Read moreillustrate The WM9707 is a high-quality stereo audio codec that is compliant with the AC'97 version 2.1 specification. The full-duplex 18-bit codec features and supports variable sampling rates from 8 to 48k samples/sec, providing excellent quality with a high signal-to-noise ratio. Other features include 3D sound enhancement, line level output, hardware sample rate conversion, master/...
Read more