feature LED Drivers (2 to 4) for Parallel LEDs Supports Ultra Low Voltage Drop (
Read moreDescription Features Available RoHS Pb-Free and Pb-Free Solder Products High Efficiency Synchronous Buck Topology Low Noise Fixed Frequency Operation Wide Input Voltage Range: 4.5V–13.8V High Continuous Output Current: 20A Programmable output voltage range: 0.59V–5.1V Overcurrent and output overvoltage protection with auto-restart Remote differential output ...
Read moreInput and output impedance The Y-series converter should be connected to the DC power supply with low impedance. In many applications, the inductance associated with the distribution from the power supply to the converter input can affect converter stability. Decoupling capacitors are recommended to ensure converter stability and reduce input ripple voltage. Internally, the converter has a...
Read morefeature PLL generated or direct master clock; low EMI design; 108 dB DAC/107 dB ADC dynamic range and signal-to-noise ratio; -94 dB THD+N; kHz to 192 kHz sample rates; differential ADC input; single-ended DAC output; log volume control with scalable SPI functionality; software-controlled no-click mute; software shutdown; right, left, I2S, and TDM modes; master /S...
Read morefeature Charge-balanced ADC; 24-bit no missing code; 0.0015% nonlinearity; five-channel programmable gain front end; gain 1 to 128 ; configurable as three fully differential; inputs or five pseudo-differential inputs; three-wire serial interface; SPI 8482 ; , QSPI™, MICROWIRE™ and DSP compatible; 3V (AD7714-3) or 5 V (AD7714-5) operation; low noise (
Read morefeature Nearly Transient Response Low Dropout Load Regulation up to 2.7A: Typical 0.05% Trim Current Limit On-Chip Thermal Limit Standard TO-220 , TO-263, TO-263 Heart Cut and TO-252 (DPAK) Packages application GTL+ Bus Power Low Voltage Logic Power Switching Power Supply Post Regulator for VRM 8.5 illustrate The FAN1589 is a low dropout three t...
Read morefeature Internal avalanche ruggedized sensor Low startup current (40uA max) at 240V AC and 0.4W load Precise fixed operating frequency (66kHz) Low EMI frequency modulation Pulse-by-pulse current limiting (adjustable) Overvoltage protection (OVP) Overload protection (OLP) Thermal Shutdown function (TSD) Auto-restart mode Undervoltage lockout (UVLO) with hysteresis B...
Read moreIt shows that a reliable and compact high-performance configuration bitstream storage and transmission solution is essential for high-density FPGAs. Platform Flash XL is the industry's highest performance configuration and storage device optimized for high performance FPGA configurations. Platform Flash XL integrates 128 Mb of in-system programmable flash storage and performa...
Read morefeature Monitors up to five voltages; improved RPM and PWM performance; controls and monitors up to four fans; high and low frequency fan drive signals; one chip and two remote temperature sensors; extended temperature measurement range to 191 °C; automatic Fan Speed Control Mode Control System; Cooling Based on Measured Temperature; Enhanced Acoustic Mode Greatly Reduces U...
Read moreGeneral Instructions The V385A transmitter converts 28-bit 3.3V from CMOS/TTL to 4 low-voltage differential signaling (LVDS) data streams, while sending the transmit clock input in parallel with the data stream through a fifth LVDS link. Compared to the V385, the V385A offers an extended clock frequency range of 12-90mhz instead of 20-85mhz. Other performance improvements...
Read moreGeneral Instructions FM27C512 is a high performance 512K UV erasable electrically programmable read only memory (EPROM). Manufactured using Fairchild's proprietary CMOS AMG 8482 ;EPROM technology, it achieves the perfect combination of speed and economy while delivering exceptional reliability. The FM27C512 provides the capacity for a microprocessor-based system ...
Read more