• 2022-09-23 11:14:56

feature Average Current Sensing, Continuous Boost, Leading Edge Low Total Harmonic Distortion and Near Unity Power Factor Correction Power Factor Built-in ZVS Switch Control for Fast Response Efficiency at High Power Levels Average Line Voltage Compensation (with No Voltage Control) Current Feedback Gain Modulation Comparator Improves Noise Immunity and...

• 2022-09-23 11:14:06

feature High data rates: DC to 100 Mbps (NRZ); 3.3 V and 5.0 V operation/horizontal translation compatible; maximum operating temperature 125 degrees Celsius; low power operation; 5V operation; 1.0 mA max at 1 Mbps; 4.5 mA max at 25 Mbps 16.8 mA max at 100 Mbps; 3.3 V operation; 0.4 mA max at 1 Mbps; 3.5 mA max at 25 Mbps; 7.1 mA max at 50 Mbps; 8-lead SOIC package (lea...

• 2022-09-23 11:14:06

feature 10-Bit Temperature-to-Digital Converter; Temperature Range: -40°C to + 125 °C; Typical Accuracy of ±0.5°C at +40°C; SMBus/I2C® Compatible Serial Interface; 3μA Power-Down Current; Temperature Conversion Time: 29µs typical; space saving 6-lead ( AD7414 ) and 5-lead (AD7415); SOT-23 package; pin-selectable addressable via AS; overtemperature indica...

• 2022-09-23 11:14:06

introduce 1.1 Explain that the CCD timing generator and a/D converter are used to process the CCD signal. The system synchronizes the master clock, HD and VD. The VSP2267 supports all signal termination required for CCD and vertical drivers, as well as externally triggered mechanical shutter and gating functions. The R drive and H drive synchronize the clock phase of the A/...

• 2022-09-23 11:14:06

Features Description Low output jitter The UCC2897A PWM controller simplifies the main and auxiliary soft stop to implement various active clamp or reset and synchronous rectification switching power supply topologies. 110-V Input Startup Function for Active Clamping, Forward Reset, Flyback The UCC2897A is a peak current mode fixed frequency high performance pulse width mo...

• 2022-09-23 11:14:06

feature Programmable output from 1.10V to 1.85V in 25mV steps Using integrated 5-bit DAC Maximum two interleaved synchronous phase performance 100nsec transient response time Built-in current sharing between phases Remote sensing Programmable active droop  ( Voltage positioning) Programmable switching frequency from 100KHz to 300KHz per phase Adaptive delay gate switch Integr...

• 2022-09-23 11:14:06

feature High power switch mode DC-DC controller can provide more than 13A output voltage can be adjusted from 1.2V to 3.6V 85% efficiency cumulative accuracy < 3% over line, load and temperature changes Over voltage and short circuit protection built-in soft start no over tune application High-efficiency power supply for I/O and AGP power ASICs for desktop computers High-effici...

• 2022-09-23 11:14:06

feature Signal recovery from +100 dB noise; 2 MHz channel bandwidth 45 V/s slew rate; –120 dB crosstalk @ 1 kHz; pin programmable closed-loop gains 1 and 2; 0.05% closed-loop gain accuracy and matching; 100 V channel Offset voltage ( AD630BD ); provides 350 kHz full power bandwidth chip. Product Description The AD630 is a high precision balanced modulator that combines a flexib...

• 2022-09-23 11:14:06

feature Low power; 1.7 mA/amp supply current; fully specified for 5 V and +5 V supplies; high output current, 125 mA; high speed; 350 MHz, -3dB bandwidth (G=+1); 150 MHz, -3dB bandwidth (G=+2); 2250 V/s slew rate; 20 ns settling time to 0.1%; low distortion; –72 dBc worst harmonic @ 500 kHz, RL=100; –66 dBc worst harmonic Wave@5 MHz, RL=1k; good video specs (RL=1k, G=+...

• 2022-09-23 11:14:06

The VNI8200XP is a monolithic 8-channel driver with very low supply current, integrated SPI interface and high efficiency 100mA micropower step-down switching regulator peak current control loop mode. Implemented in STMicroelectronics 8482 ; VIPower™ technology, this integrated circuit is designed to drive any type of load with one side grounded. Active channel current limiting ...

• 2022-09-23 11:14:06

Features 8-pin solution reduces external components Wide range of universal AC input voltage Fixed 65 kHz operating frequency with 98% maximum duty cycle (typ). Output Over/Under Voltage Protection Input Brown Output Protection Cycle-by-Cycle Peak Current Limit Open Loop Detection Low Power User Controlled Standby Mode Applications CCM boost power factor corrected ...