Features ● Excellent sound quality ● Ultra -low distortion: 0.000022% ● [ 123] Low noise: 1.3NV/√Hz ● High speed: conversion rate: 50V/μs #872222 Gain bandwidth: 180MHz ● Full differential architecture: Balance input and output convert single -end input to a balanced differential output [[[ 123] ● Wide power range: ± 2.5V to ± 16V ● Turn ...
Read moreFeatures FET input: IB u003d 50 PA Maximum Value Broadband: 8 MHz High conversion rate : 20 v/μs Low noise: 8nv/√Hz (1 kHz) Low incomparable: 0.00008%) # 8226; High -Open Ring gain: 130 DB (600Ω load) Wide -wide power range: ± 2.5 to ± 18v Low offset voltage: maximum 500 μV single, double and four versions Application SAR...
Read moreFeature Single power supply 3.3V operation Built -in sampling and maintenance Direct 3 -line interface of most MPU serial port All MPUs Parallel port 30kHz maximum throughput Main specifications minimum guarantee power supply voltage: 2.7V Resolution: 12 digits Quick conversion time: up to 24 μs ultra -temperature. Low power supply current: 1.0ma Applica...
Read moreFeatures Low offset voltage: 75 μV (maximum) zero drift: 0.1 μV/° C #8226 ; Low noise: 10 nv/√Hz Very low 1/f noise Excellent DC accuracy: - Power suppression Compared: 126 db –cmrr: 114 db -Chiro -opening gain (AOL): 120 db Static current: 525μA (maximum) [123 123 [123) ] Width voltage range: ± 2 v Rail transmission: Input included ne...
Read moreFeatures Dual MOSFET driver used for synchronization rectification Converter High drive current of fast external MOSFET Switch 123] Integrated the diode High -frequency operation Enable the pin Self -adaptive dead zone management Flexible door drive: 5 V to 12 V v Compatible Output high impedance (Hiz) management Phase stop Preliminary OV prot...
Read moreFeatures Excellent sound quality Ultra -low noise: 1.1nv/√Hz Super Low D deviation: 0.000015%1kHz High conversion rate: 27V/μs Broadband width: 40MHz (g u003d+1) ] High Kailing Ring gain: 130db Uniform gain stability Low static current: 3.6MA (single), 7.2ma (double) Rail -to -track output Wide power supply range: ± 2....
Read more1. Features The working power supply voltage is 5V to 12V bus up to 1.3A grid current capacity The output voltage can be adjusted n- Reverse E/A input can be available for 0.9V ± 1.5%reference voltage voltage mode PWM control Very fast load transient response 0 %To 100%duty cycle Good output Overwriting protection HICCUP over current protection 200k...
Read moreFeatures Low -voltage noise: 1 kHz is 1.1 nv/√Hz Input voltage noise: 80 nvpp (0.1 Hz to 10 Hz) [ 123] THD+N: - 136DB (g u003d 1, f u003d 1 kHz) offset voltage: 350 μV (maximum) #8226; offset voltage drift: 0.35μV/° C (typical value) Low power current: 6 mA/CH (maximum) unified gain; unified gain Stability gain bandw...
Read moreCompensation networks ZIN (R3, R4 and C20) and ZFB (R5, C18 and C19) are compensated networks. The compensation network must provide a closed -loop transmission function with a rapid response (but always lower than FSW/10) and the highest 0db cross -frequency of the highest gain at the highest increase in load adjustment under DC conditions. A stable control loop has an inc...
Read moreFeatures Low noise: 3NV/√Hz Broadband: —OPA227: 8 MM, 2.3 volts/microseconds —OPA228: 33 MM, 10 volts/microseconds Settling time: 5μs (significantly improved than OP-27) High -co -model suppression ratio: 138 db High -Open Ring gain: 160 db Low input bias current: maximum 10 na # 8226; low offset voltage: maximum 75 μV Wide power su...
Read moreFunctional description LM9070 is a 5V, 3%accurate, 250 mmed low -2 automotive application reliability antihypertensive regulator. The regulator has a 3%output voltage voltage tolerance to the low delay resetting output logo, which can be used to restart the radiation radio frequency interference for restarting the microprocessor system. Any reason. A delayed time interval of an external ...
Read more