Explanation LM2940-N/LM2940C voltage drop is usually 0.5V@iou003d1A with the ability to provide 1A output current exceeding 1A, and the voltage drop is usually 0.5V. The maximum is the entire temperature range. Inside, adjust the output voltage 1V before assembly. In addition, it also includes reverse protection of static current to reduce circuits. When the image insertion is ...
Read more
Features Low -voltage noise: 1 kHz is 1.1 nv/√Hz Input voltage noise: 80 nvpp (0.1 Hz to 10 Hz) [ 123] THD+N: - 136DB (g u003d 1, f u003d 1 kHz) offset voltage: 125μV (maximum) #8226; offset voltage drift: 0.35μV/° C (typical value) Low power current: 3.6 mA/CH (typical value) unified unified Stability of gain gain bandwidth product: 8...
Read more
Features Unit gain bandwidth: 250MHz Broadband: 100MHz GBW High conversion rate: 150V/ s Low noise: 6.5nv/ √Hz [123 [123 ] I/O High -output current: gt; 100ma Outstanding video performance: Differential gain: 0.02%, difference: 0.09: 0.09 0.1DB gain flatness: 40MHz Low input bias current: 3Pa Static current: 4.9ma Hot turnover Power range: 2.5V...
Read more
1. Features 3V to 5.5V VCC range The minimum output voltage is as low as 0.6 volts 1V to 35V input voltage range Constant constant Topology on time Quick load transient 0.6V, ± 1%vREF optional sink mode non -destructive current limit, available also under the bottom Sinking mode Remote sensing OVP, UVP atresia protection 600μA typical static curren...
Read more
Features Low noise: 1 kHz is 7.5 nv/√Hz 0.1 Hz to 10 Hz noise: 0.8 μVPP ] Static current: 760 μA (typical) low offset voltage: 5μV (typical value) gain bandwidth product: 5.5 MHz [123 [123 [123 ] Rail -to -track input and output Single power supply Power supply voltage: 2.2 V to 5.5 v ] Package saving space: -SC70, SOT-...
Read more
Gradually design Application conditions: vin u003d 3.3V, ± 10%vout u003d 1.25V IOUT u003d 5A fsw u003d 270kHz Input a capacitor. Pulse current (the average value is zero) flows through the input capacitor of the buck converter. The AC component of this current is quite high, and the ESR of the capacitor consumes a lot of power: The average root current that the capa...
Read more
Features High Bandwidth: 80MHz High conversion rate: 55V/μs excellent Video performance 0.5DB gain flatness: 25MHz Differential gain: 0.3% difference: 0.7 °; The input range includes ground Rail output #8226; Shipping current: lt; 5μA Low static current: 5.2MA Single power supply scope:+2.7V to+3.3V Micro ...
Read more
Features Excellent sound quality Ultra -low noise: 1.5NV/√Hz Super Low distortion: 0.00003%at 1kHz High conversion rate: 20V/μs Broadband: 35MHz (G u003d+1) Gao Kaihuan gain: 120db Uniform gain stable Low static current: Every 2.6MA channel orbit; Rail output Wide power supply range: ± 2.25V to ± 18V provides double and fou...
Read more
Features Soft switch complementary PWM control Able to program dead zone semi -bridge The operating frequency is as high as 500 kHz Vehicle high -voltage start Advanced light load management Adaptive UVLO Pulse OCP OLP (locking or automatic restart) Transformer saturation test [123 ] The interface of the PFC controller The disabled input Power -...
Read more
Treatment L6591 is equipped with a comparative device, which has an external non -reversing input at the tube foot DIS (#2). When the voltage is 4.5 V, when the pins exceed the internal threshold, the integrated circuit immediately turn off the low value consumption. The information is locked, and it is necessary to make the voltage on the VCC pin below the reset and lock and rest...
Read more
Features ● Low input noise voltage: 2.0NV/√Hz ● High -unit gain bandwidth: 500MHz ● High -gain bandwidth product: 240MHz ● High -output current: 90mA ● A single+5V to+12V operation ● Low power supply current: 4.8ma/ch ] ● XDSL differential line receiver ● High dynamic range ADC driver ● Low noise PLL integralor I/Q amplifier ● Acti...
Read more