General Instructions The AD7863 is a high speed, low power, dual 14-bit analog-to-digital converter that operates from a 5 volt supply. This section includes two 5.2µs successive approximation ADCs, two track/hold amplifiers, an internal 2.5v reference, and a high-speed parallel interface. The four analog inputs are divided into two channels (A and B), selected by the a0 input. Each ...
Read more
General Instructions The W77I058 is a fast 8051 compatible microcontroller with a redesigned processor core with no wasted clock and memory cycles. As a result, it executes every 8051 instruction faster than the original 8051 at the same crystal speed. Typically, the instruction execution time of the w77i058 is 1.5 to 3 times faster than the legacy 8051, depending on the type of instruction...
Read more
feature Logically 4-kbit Ferroelectric Random Access Memory (F-RAM) organized by 512 x 8 High Endurance 10 Trillion ( 1013 ) Read/Write 121 Year Data Retention Period (see Data Retention and Endurance Table) nodelay 8482 ; Write Into advanced high reliability ferroelectric process Very fast Serial Peripheral Interface (SPI) up to 14 MHz Direct replacement for Ser...
Read more
General Instructions The AD8541 /AD8542/AD8544 are single-, dual-, and quad-rail input and output, single-supply amplifiers with very low supply current and 1 MHz bandwidth. All supplies are guaranteed to operate from a single 2.7 V supply and a 5 V supply. These parts provide 1 MHz bandwidth with low current consumption of 45µA per amplifier. The extremely low input bias curre...
Read more
feature Internal Avalanche Rugged Sensor: 650V Precise Fixed Operating Frequency: 67kHz Unbiased 265Vac No Load < 150mW Winding;
Read more
General Instructions The W681360 is a general-purpose single-channel 13-bit linear pcm codec with 2s complement data format. It is powered by a +3V supply and is available in 20-pin SOG (SOP), SSOP and TSSOP package options. The main function of this device is the digitization and reconstruction of the speech signal, including band limiting and smoothing required by the pcm s...
Read more
General Instructions The w25q64cv (64m-bit) serial flash memory provides a storage solution for systems with limited space, pins, and power. The flexibility and performance of the 25Q series far exceeds that of ordinary serial flash devices. They are great for code tracing to RAM, executing code directly from dual/quad spi (xip), and storing speech, text and data. The device operates on ...
Read more
The AD7520 and AD7521 are monolithic, high precision, low cost, 10- and 12-bit resolution, multiplying digital-to-analog converters (DACs). Intersil's thin films on CMOS processes offer up to 10-bit accuracy in TTL/CMOS compatible operation. The digital inputs are fully protected against electrostatic discharge by diode-to-ground and positive supply. Typical applications ...
Read more
General Instructions The AOZ1021 is a synchronous high-efficiency, simple-to-use, 3-buck regulator. The AOZ1021 operates from an input voltage range of 4.5V to 16V, providing up to 3A with continuous output current adjustable down to 0.8V. The AOZ1021 is available in an SO-8 package and is rated over an ambient temperature range of -40°C to +85°C. Features: (1), 4.5V to 1...
Read more
feature Internal Avalanche Rugged FET consumes only 0.65W at 240V AC and 0.3W load Advanced Burst Mode Operation Low EMI Frequency Modulation Accurate Fixed Operating Frequency Internal Startup Circuit Pulse-by-Pulse Current Limit Abnormal Over Current Protection Over Voltage Protection Overload Protection Internal Thermal Shutdown function Auto-restart...
Read more
feature Avalanche Internal Sensor Precision Fixed Operating Frequency: 67khz-=YTET Advanced Burst Mode Operation Internal Startup Circuit Pulse Dual Pulse Current Limit Overvoltage Protection Overload Protection (OLP) Internal Thermal Shutdown Function Self-Recovery Mode Voltage Lock (UV) Soft Start Secondary side adjustment application Chargers and Ad...
Read more