• 2022-09-23 10:06:27

The ISL315xE is protected by IEC61000 ESD, and 5V meets the standard for balanced communication of electrical transceivers for RS-485 and RS-422. Driver outputs and receiver inputs are protected from ±16.5kV ESD strikes without latch-up. Transmitters in this series offer excellent differential output voltage (2.4V min), input required RS-48554Ω loads, improve noise immun...

• 2022-09-23 10:06:27

In the fields of modern electronic measurement, communication systems and biomedicine, data acquisition and storage of broadband analog signals are often involved so that computers can further process data. In order to collect high-speed analog signals without distortion, according to the Nyquist theorem, the sampling frequency must be more than twice the signal frequency, but the anti-noise pe...

• 2022-09-23 10:06:27

With the widespread use of modern communication technologies, the competition among communication enterprises is intensifying. In order to enhance their own competitive advantages, communication enterprises need to improve the quality of their communication signals and improve the stability, security, and efficiency of various indicators of the communication system. sex. In the audio signal pro...

• 2022-09-23 10:06:27

feature ●4.5V to 16V operating input voltage range 50mΩ internal PFET switch, high efficiency: up to 95% ●Internal soft start; output voltage adjustable to 0.8V 3A continuous output current; fixed 500kHz PWM operation ●cycle-by-cycle current limit ●Short circuit protection; output overvoltage protection ● Thermal shutdown; small SO-8 package application ●Point-of-load DC...

• 2022-09-23 10:06:27

feature 3.0 V to 5.5 V supply operation; 50MHz serial interface; 10 MHz multiplier bandwidth; ±10 V reference input; low fault energy

• 2022-09-23 10:06:27

6326 -ic/" title="ISL6326 Product Parameters, Documentation and Sourcing Information" target="_blank">ISL6326 controls the microprocessor core voltage regulation via in parallel. The multiphase buck converter architecture uses interleaved timing to multiply the channel ripple Frequency reduces input and output ripple current. Low ripple results in fewer components, lower component co...

• 2022-09-23 10:06:27

These Intersil RS-485 /RS-422 devices are BiCMOS 3.3V compliant with RS-485 and RS-422 balanced communication standards. Unlike competing devices, this Intersil family is specified as a 10% tolerance supply (3V to 3.6V). The ISL83483 and ISL83488 use slew rate limiting drivers to reduce EMI and reduce undue reflections in terminated transmission lines or unterminated ...

• 2022-09-23 10:06:27

PLD (Programmable Logic Device) has developed rapidly and attracted more and more attention due to its flexible operation, convenient use, rapid development and low investment risk. PLD is a logic device that can be programmed by users on the job site. It has developed from simple PAL and GAL to CPLD , EPLD, FPGA and FLEX series. They all have the characteristics o...

• 2022-09-23 10:04:57

Today I want to talk with you about the IO of FPGA First let me tell you about my experience. There are not many laboratories with FPGA development conditions in domestic universities. Some of the students in the university did ARM, some did Linux, and very few did FPGA. At that time, learning FPGA was just because of very eager curiosity. Therefore, I bought a develo...

• 2022-09-23 10:04:57

feature Low Supply Current: 250 μA/amp max; High Slew Rate: 9V/μs; Bandwidth: 3.5 MHz typical; Low Offset Voltage: 1 mV max at 25°C; Low Input Bias Current: 20 max at 25°C Pa; CMRR: 90db typical fast settling time unity gain stable. application Mobile communications; low power industrial instrumentation; loop filters; active and precision filters; integrators; strain...

• 2022-09-23 10:04:57

feature At 185 MHz AIN and 250 MSPS, the signal-to-noise ratio is 70.6 dBFS; at 185 MHz AIN and 250 MSPS, SFDR=85 dBc-151.6 dBFS/Hz input noise, 185 MHz, -1 dBFS AIN and 250 ms/sec; Total power consumption: 785 mW at 250 MSPS; 1.8V supply voltage; LVDS (ANSI-644 grade) output; integer 1 to 8 input clock divider (maximum input 625 MHz); sampli...