Pin Description The Enhanced Serial Communications Controller (ESCC) pins are divided into seven functional groups: 1. address/data 2. Bus Timing and Reset 3. equipment control 4. interrupt 5. Serial data (two channels) 6. Peripheral control (two channels) 7. Clock (two channels) Z80230 and Z85230/L. The pin functions are unique for each bus interface version. In the Address...
Read more
The EL5210 and EL5410 are low power, high voltage rail-to-rail input-output amplifiers. The EL5210 contains two amplifiers in one package and the EL5410 contains four amplifiers. Operating over a voltage range of 5V to 15V , while consuming only 2.5mA per amplifier, the EL5410 and EL5210 have a bandwidth of 30MHz (-3dB). They also offer common-mode input capability beyond the...
Read more
The ADS1240 and ADS1241 feature precision wide dynamic range, delta-sigma, analog-to-digital (A/D) converters with 24-bit resolution that operate from 2.7V to 5.25V. The delta-sigma A/D converter provides up to 24 bits of no missing code performance and an effective resolution of 21 bits. Input channels are multiplexed. Internal buffering can optionally provide very high input impe...
Read more
Functional Description Low-Power CMOS Technology Microchip Technology Inc. 93XX86A/B/C Devices Word-Sized ORG Pin Selected for "86C" Version 16K-bit Low-Voltage Serial Electrically Erasable 2048 x 8-bit Organization "A" device (unorganized) PROM (EEPROM). word optional devices such as The 1024 x 16-bit organization "B" device (unorganized) 93XX86C ...
Read more
BA10358 /BA10324A and high-reliability BA2904/BA2902 integrate two or four independent operational amplifiers on a single chip and have some features with high gain, low power consumption and wide operating voltage range from 3V to 36V (single power supply). The BA2904W has a low input offset voltage (2mV max). feature Can be powered by a single power supply Wide operating supply...
Read more
The HIP6601B , HIP6603B and HIP6604B are high frequency, dual MOSFET drivers specifically designed to drive two power N-channel MOSFETs in a synchronous rectified buck converter topology. These drivers combine with the HIP63xx or ISL65xx family of multiphase step-down PWM controllers and MOSFETs to form a complete core-advanced microprocessor voltage regul...
Read more
Digital DC/DC PMBus 17A Module ZL9117M function The ZL9117M is a 17A, variable output, step-down fully digital switch-mode power supply PMBus compliant digital power supply. Included in the module for fast transient response is a high performance digital PWM controller, power MOSFETs, an inductor and an auto-compensating PID filter with all passive components requ...
Read more
The CY2309SXC-1 is a low-cost 3.3V zero-delay buffer designed to distribute high-speed clocks in a 16-pin SOIC or TSSOP package. The CY2305SXC-1 is an 8-pin version of the CY2309. It accepts a reference input and outputs five low-skewed clocks. The -1H version of each device can run at up to 100-/133 MHz and drives higher than the -1 device. All devices have an on-chi...
Read more
The DCP02 series are 2W unregulated isolated DC/DC converters. Requiring minimal external COM ponents and including on-chip device protection, the DCP02 series provides additional features such as output disable and switching frequency synchronization. Using a highly integrated package design results in reliable products with power densitiesof at 79W/3(4.8W/cm3) for DIP-14, a...
Read more
illustrate The A96200 voice recording module provides true single-chip solid-state storage capability that requires no software or microcontroller support. It provides high quality recording and playback with 20 seconds of dual information. feature z non-volatile flash technology Z No backup battery required Z User-friendly and easy to operate Z slide switch for recording or playback Z s...
Read more
General Instructions The USBN9602 is an integrated USB node controller that controls endpoint EP0 and six FIFOS, the other six are not recognized by USB specification version 1.0 and 1.1. Supporting USB interrupt, bulk and integration onto a single IC is the required USB transfer isochronous data transfer. 8-bit parallel interface receiver USB Endpoint (EP) FIF...
Read more