• 2022-09-23 12:40:14

The C8051 F020/C8051F021/C8051F022/C8051F023 devices are fully integrated mixed-signal system-on-chip MCUs with 64 digital I/O pins (C8051F020/C8051F022) or 32 digital I/O pins (C8051F021/C8051F023). Selection of specific product features. High-speed pipelined 8051 compatible CIP-51 microcontroller core (up to 25 MIPS) In-system, full-speed, non-intrusive debug in...

• 2022-09-23 12:40:14

Z02205 Modem Controller PS00 100 0-MOD0599 Type 23 can control the following blacklist parameters: Minimum delay between consecutive dial attempts (seconds) Minimum delay between consecutive dial attempts (seconds) after the number of consecutive dial attempts after the following parameters are applied Maximum number of dial attempts allowed in series Dial attempts Blacklist time (mi...

• 2022-09-23 12:40:14

Device Name: Silicon Diode Model Name: YG963S6 R Specification number: MS5D1437 Scope This specification specifies the ratings and test requirements for Fuji silicon diodes. YG963S6R type applied power factor correction circuit (current continuous mode) This diode is a product that optimizes diode characteristics for power factor correction circuits. Although there is a rela...

• 2022-09-23 12:40:14

The AD8021 is a very high performance and high speed performance voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to operate with low voltage and low current noise (2.1 nV/√Hz typical, 2.1 pA/√Hz typical) between the lowest quiescent supply current (7 mA @ ±5 V) at today's high speeds, Low noise operational amplifier. The AD8021 operates...

• 2022-09-23 12:40:14

describe 3120 -ic/" title="HCPL-3120 Product Parameters, Documentation and Sourcing Information" target="_blank">HCPL-3120 consists of a GaAs LED optically coupled to an output stage with a power integrated circuit. This is an optoelectronic The coupler is ideal for driving power in variable frequency applications using IGBTs and MOSFETs for motor control. The output...

• 2022-09-23 12:40:14

Features Fixed 60kHz switching frequency 9 V to 38 V Wide Range VDD Voltage Current Mode Control Auxiliary Undervoltage Lockout with Hysteresis High Voltage Startup Current Source SO-8 DIP-8 Over-temperature, over-current, and over-voltage typical applications include offline power protection, battery charger adapter auto-restart, backup power supply Typical power for...

• 2022-09-23 12:40:14

The BQ2409X family of devices is highly integrated for Li-Ion and Li-Polymer linear chargers for portable applications where device protection space is limited. Device - 6.6 V overvoltage protection can be operated via USB port or AC adapter. The - input voltage dynamic power management for high input voltage range, input overvoltage protection supports low cost unregulated adapter...

• 2022-09-23 12:40:14

HCPL-261A Series Optics This data shows that coupled gate slices provide all the benefits of the industry standard 6N137 series with the benefits of HCMOS compatible input currents. This therefore works directly with all common circuit topologies without additional LED buffer or driver components. The AlGaAs LED allows the use of lower drive currents and reduces degradatio...

• 2022-09-23 12:40:14

illustrate The YB1210R is a series of ultra low noise, low noise output mismatch (LDO) linear voltage regulators with 2.0% voltage accuracy. When the YB1210R regulator achieves a 300mA load current of 3.3V, the 320mV low dropout output voltage range is 1.2V to 3.6V, 0.1V per level (custom voltage is considerable upon request). The YB1210R regulator is optimized for use with lo...

• 2022-09-23 12:40:14

The 82C89 is typically used in medium to large 80C86 or 80C88 systems where multiple processors must access the bus to coordinate. The 82C89 also offers high output current and capacitive drivers without additional bus buffering. Static CMOS circuit design ensures low power consumption. This advanced Intersil SAJI CMOS process achieves performance equal to or greater than exis...

• 2022-09-23 12:40:14

The DS485 is a low power transceiver for RS-485 and RS-422 communications. The device contains a driver and a receiver. Driver slew rates up to 2.5 Mbps allow operation (see Applications Information section). The transceiver draws 200 μA of supply current when the unloaded or fully loaded drive is disabled and operates from a single +5V supply. The driver is short-circuit current ...