The EL8200 , EL8201 and EL8401 are high bandwidth, single supply, low power, rail-to-rail output voltage feedback operational amplifiers. The amplifier is internally compensated for a larger closed-loop gain of 1. Connected in voltage follower mode and driving a 1kΩ load, they have a -3dB bandwidth of 200MHz. Driving a 150Ω load, the bandwidth is approximately 130MHz while maintai...
Read more
BA6247FP-Y , BA6238A reversible motor driver for output of 1.0A or higher for two motors drives brushed motors and contains a half-motor reversible motor drive circuit. In addition, since the output section can control the voltage applied to the motor voltage setting pin by outputting high, the torque when driving the motor can be changed. Features 1) Built-in one and a half circuit re...
Read more
The ZL2106 is a digital power conversion and management integrated circuit that combines an integrated synchronous buck DC/DC converter with key power management functions in a small package, resulting in a flexible, integrated solution. The ZL2106 can provide an output voltage of 0.54V to 5.5V (with margin), and the input voltage is between 4.5V and 14V. Internal low RDS(ON) s...
Read more
The HA4314B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing and other high performance applications. The circuit features extremely low power consumption (105MW enabled, 4mW disabled), excellent differential gain and phase, and very high off isolation. When off, the output switches to a high impedance state, making ...
Read more
The CC1100E features a Sub-GHz high performance radio transceiver designed for very low power RF applications. It is intended for the Industrial, Scientific and Medical (ISM) and Short Range Device (SRD) frequency bands at 470-510 MHz and 950-960 MHz. The CC1100E is particularly suitable for wireless applications targeting Japan ARIB STD-T96 and China Short...
Read more
DP83910A consists of five main logic blocks 1. The 10MHz transmit clock signal generated by the oscillator is the system timing Second, the Manchester encoder accepts the encoded data from the NRZ data controller, and the difference between Manchester and anti-MITS to transmit the driver through the infinite interval of the transceiver with the difference 3. The Manchester decode...
Read more
Function description 8-Channel Voltage Controlled Amplifier – LNA, VCAT, PGA, LPF and CW Mixer The VCA5807 is an integrated voltage controlled amplifier (VCA) designed for high performance, small form factor ultrasound systems. Programmable Low Noise Amplifier (LNA) 24/18/12 dB gain -0.25/0.5/1 Vpp linear input range -0.63/0.7/0.9 nv/rthz input referred noise ...
Read more
The AD420 is a complete digital to current loop output converter designed to meet the needs of the industrial control market. It provides a high-accuracy, fully integrated, low-cost single-chip solution for generating current loop signals in a compact 24-pin SOIC or PDIP package. The output current range is programmable from 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA for the...
Read more
1. General Instructions The W681310 is a general-purpose single-channel PCM codec with pin-selectable law or A-law companding. The device complies with the ITU G. 712 specification. It is powered by a +3V supply and is available in 20-pin SOG, SSOP and TSSOP package options. The functions performed include digitization and reconstruction of speech signals, as well as ba...
Read more
EL5106 and EL5306 are fixed gain amplifiers with a bandwidth of 350MHz. This makes these amplifiers ideal for today's high-speed video and surveillance applications. They have internal gain setting resistors and are configurable in gain of +1, -1 or 2. With only 1.5mA of supply current and the ability to operate from a single supply voltage from 5V to 12V , these amplifiers are als...
Read more
The BQ3060 Battery Manager is a fully integrated, single-chip, package-based solution providing rich functionality for gas measurement, protection of 2, 3 or 4 series cells and certified Li-Ion battery packs. With a footprint of only 7.8mm x 6.4 mm and a compact 24-pin TSSOP package, the BQ3060 maximizes functionality and safety and greatly reduces the cost and size of solutions for...
Read more