• 2022-09-23 12:35:41

The VSP2267 is a complete mixed-signal integrated circuit for CCD signal processing, using a CCD timing generator and A/D converter. The system synchronizes the master clock, HD and VD. The VSP2267 supports all signal termination required for CCD and vertical drivers, as well as externally triggered mechanical shutter and gating functions. The R driver and H driver synch...

• 2022-09-23 12:35:41

CAT803 , CAT809 and CAT810 are supervisory circuits that monitor power supplies in digital systems. The CAT803, CAT809 and CAT810 are drop-in replacements for the MAX803 , MAX809 and MAX803 and the MAX810 is suitable for applications in the industrial temperature range. These devices generate a reset signal that is asserted when asserted when the supply voltage fall...

• 2022-09-23 12:35:41

The HCPL-7800 series of isolation amplifiers are designed for current sensing in electronic motor drives. In typical automotive and industrial applications, the HCPL-7800 detects the analog voltage drop caused by motor current passing through an external resistor. The HCPL-7800 isolation amplifier is based on Avago's optocoupler and optoelectronic technology. Figure 3 shows th...

• 2022-09-23 12:35:41

Commonly used platinum thermal resistance, that is, as the temperature increases, the resistance of the sensor itself changes in a positive correlation, as shown in Figure 1.1, when the temperature of the measured object rises by 1 °C, the resistance of the PT100 increases by 0. 385 , and at - 200 ° C ~ In the range of 850 ℃, the good linearity of platinum thermal resistance PT100 prov...

• 2022-09-23 12:35:41

The DAC7554 is a quad, voltage output DAC with excellent linearity and monotonicity. Its priority structure minimizes unwanted transients such as code-to-code glitches and channel-to-channel crosstalk. The low power DAC7554 runs from a 2.7VT0 5.5 V Py. The DAC7554 0UTPUT amplifier can drive a 2-KL, 200PF load rail-to-rail 5-PS settling time; the output range is set u...

• 2022-09-23 12:35:41

The ADC0805 devices are CMOS 8-bit continuous interface logic - using differential access time 135 ns approximate converters (ADCs) as stand-alone devices These converters are designed to allow operation of the bus with three-state output latches to directly drive the 8226 ; logic inputs and outputs Meet MOS and data bus. These ADCs look like memory location TTL voltage leve...

• 2022-09-23 12:35:41

The ZL2103 is an innovative power conversion and management IC that combines an integrated synchronous buck DC/DC converter with key power management functions in a small package, resulting in a flexible, integrated solution. The ZL2103 can provide an output voltage of 0.54V to 5.5V (with margin), and the input voltage is between 4.5V and 14V. Internal low RDS(ON) synchronous...

• 2022-09-23 12:35:41

The BA6209 and BA6209N are reversible motor drivers for brushed motors. Two logic inputs allow three output modes: forward, reverse and brake. By controlling the applied voltage, the motor speed can be arbitrarily set to the motor with the control pin voltage VR. application VCRs and cassette tape recorders Features 1) Power transistors can handle large currents (max 1.6A). 2) App...

• 2022-09-23 12:35:41

The EN5394QI is a complete power system-on-chip (PowerSoC) that integrates power switches, inductors, gate drivers, controllers and loop compensation in a tiny 8mmx11mm package. The 1.85mm low profile and small pinout allow this model to be used in space-constrained applications. The EN5394QI uses an external resistor divider, and the output voltage can be set to any user-defined val...

• 2022-09-23 12:35:41

An FPGA-based visible light and near-infrared micro-spectrometer, its research scheme and implementation functions are introduced. The miniature spectrometer adopts the MS series CMOS image sensor of Hamamatsu Company, with a wavelength detection range of 340 nm to 1 050 nm and a spectral resolution of about 10 nm; the power consumption is less than 600 mW, and it can be powered dir...

• 2022-09-23 12:35:41

HIP6018B is a high-efficiency synchronous single-phase PWM controller with single-loop control design, with voltage monitoring function, overvoltage and overcurrent protection function, and voltage monitoring function. It can provide accurate core voltage supply for high-performance processors, and can also provide 1.5V and 2.5V power supply voltages for computers. HIP6018 power IC ...