DRV8412 , DRV8432 are high-performance, integrated dual-channel full-bridge motor drivers and advanced protection systems. Because of the low R DS(ON) H-bridge MOSFETs designed with smart gate drives, the efficiency of these motor drivers can be as high as 97%, which enables the use of smaller power supplies and heat sinks and is a good candidate for energy efficient application...
Read more
The ZA series transient voltage surge suppressors are radial lead varistors (MOVs) designed for the protection of low and medium voltage circuits and systems. Typical applications include motor control, telecommunications, automotive systems, solenoid valves and power circuits to protect circuit board assemblies and maintain data integrity. The devices are available in five sizes: 5mm, 7mm...
Read more
Extended Temperature Performance –40°C to 125 °C Optimized for Offline and DC-to-DC Converters Low Startup Current (
Read more
BQ2050H Li-Ion Power Gauge 8482 ; IC is suitable for battery packs or installed within systems to keep accurate records of available battery capacity. The IC monitors a voltage drop detection resistor connected in series between the negative battery terminal and ground to determine the charge and discharge of the active battery. Compensated battery temperature, self-discharge, and dis...
Read more
Features On-Chip Predictive Gate Drive Operation of High Efficiency Synchronous Bucks Dual 3-A TruedDrive Outputs ±1 MHz High Frequency Operation, 70 ns Delay from Synchronous to G1 Output Leading Edge Modulation -3 Mode Operation with V to 35-V Deviation Output Stage Reverse Current Protection User Programmable Shutdown ±1.0% Initial Tolerance Band G...
Read more
The CC1050 is a true single-chip UHF transmitter designed for very low power consumption in very low voltage wireless applications. This circuit is primarily intended for use in the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands of 315 , 433 , 868 and 915 MHz respectively, but can be easily programmed to operate in other frequency ranges ...
Read more
The EL7564 is a fixed frequency, current mode controlled DC/DC converter with integrated N-channel power MOSFETs and a high precision reference. The device integrates all the active circuits needed to implement a cost-effective, user-programmable 4A synchronous step-down regulator suitable for DSP core power use. By combining a high-efficiency synchronous switch architecture wi...
Read more
The HIP6013 provides complete control and protection of a DC-DC converter optimized for high performance microprocessor applications. It is designed to drive an N-channel MOSFET using standard buck topology. The HIP6013 integrates all control, output regulation, monitoring and protection functions into a single package. The converter's output voltage can be precisely regul...
Read more
The ADS830 is a pipelined, CMOS analog-to-digital (A/D) converter that operates from a single +5V supply. The converter provides excellent performance with single-ended inputs and can operate with differential inputs for added spurious performance. This high-performance converter includes an 8-bit quantizer, high-bandwidth track/hold, and a high-precision internal reference. It also ...
Read more
Features Suitable for multiple output and/or high voltage output voltage converters up to 500 kHz operation Buck converter stage high voltage high current floating driver UC3827-1 current feed controller with overlapping push-pull driver conduction cycles UC3827-2 voltage feed Controller with non-overlapping push-pull driver conduction cycles Average current mode, peak current mode or vo...
Read more
The W81181D is a highly integrated 4-port USB hub controller with an integrated microcontroller, implementing a mid-speed (12MHz) and low-speed (1.5MHz) Universal Serial Bus (USB) hub control interface. It supports one upstream port, four downstream ports and one serial interface. The W81181D can be used as a multi-function USB device. For example, the entire system can be ...
Read more