• 2022-09-23 11:55:58

5 ns for pin logic delay on all pins fcnt to 100 MHz 36 macrocells, 800 usable gates up to 34 user I/O pins 5 Volt In-System Programmable 10,000 Program/Erase Cycle Endurance Program/Erase Enhanced Pin Lock Structure Flexible 36V18 Function Blocks Over the Full Commercial Voltage and Temperature Range 90 product terms drive any or all of the 18 macrocells within the fun...

• 2022-09-23 11:55:58

DESCRIPTION The YB1300S is a switched capacitor DC/DC boost converter that produces a regulated 5 volt output. The input voltage range is 2.7V to 5.0V, which makes the YB1300 ideal for single-cell Li-Ion battery power supplies. The YB1300 is suitable for boost applications that do not require an inductor. The 1MHz switching frequency allows the use of small SMD c...

• 2022-09-23 11:55:58

Features Cypress Premis 8482 ; Series Products Generates an EMI-optimized clock signal at the output Selectable input and output frequencies 3.3V or 5V supply operation Low power CMOS design Available in 8-pin Small Outline Integrated Circuit (SOIC) or 14-pin Thin Shrink Small Outline Package (TSSOP select option only) Overview The W181 product is a series o...

• 2022-09-23 11:55:58

The HSDL-3602 is a low profile infrared transceiver MOD-ULE that provides an interface between logic and infrared signals for an over-the-air, serial, half-duplex infrared data link. The MOD-ULE is compliant with the IrDA Data Physical Layer Specification 1.4 system evapotranspiration and IEC825-1 eye safety standards. The HSDL-3602 contains a high speed and high E...

• 2022-09-23 11:55:58

feature 5 ns pin-to-pin logic delay for system frequencies up to 178 MHz 36 macrocells, 800 usable gates in small form factor package 44-pin PLCC (34 user I/O pins) - 44-pin VQFP (34 user I/O pins) 48-pin CSP (36 user I/O pins) 64-pin VQFP (36 user I/O pins) All packages are lead free Optimized for high performance 3.3V systems low power operation 5 V tolerant I/O pi...

• 2022-09-23 11:55:58

AD537 is a new type of high precision, high linearity voltage/frequency converter introduced by American ADI (ANALOG DEVICES INC) company. It is composed of a high-impedance input amplifier, a precise oscillation system, an accurate internal reference generator and a high output current drive, which can directly receive small signals such as positive and negative voltages an...

• 2022-09-23 11:55:58

Mask testing adds a feature to the traditional function of an oscilloscope: quickly determining whether an input signal is acceptable. When an unqualified signal is captured, we can stop, take screenshots, etc. This article will introduce the mask test function of the ZDS4000 series oscilloscope, and give an application case. Template test interface introduction Figure 1 ZDS4000 series...

• 2022-09-23 11:55:58

The AD7714ARS-5 is a complete analog front-end measurement application for low frequencies. The device accepts a low level signal directly from the transducer and outputs a serial digital word. It uses sigma-delta conversion technology to achieve up to 24 bits without loss of code performance. The application input signal is based on a proprietary programmable gain front end analog modula...

• 2022-09-23 11:55:58

The DAC813 is a complete monolithic 12-bit digital-to-analog converter with a flexible digital interface. It includes a precision + 10V reference, interface control logic, double-buffered latches, and a 12-bit D/A converter with voltage output op amps. Fast current switching and laser-trimmed thin-film resistors provide high-precision, fast D/A converters. Double-buffered latches facil...

• 2022-09-23 11:55:58

The DAC7616 is a quad, serial input, 12-bit, voltage output digital-to-analog converter (DAC) with guaranteed 12-bit monotonic performance over the -x9640°C to +85°C temperature range. Asynchronous reset clears all registers to intermediate (800H) or zero-scale (000H), selectable by the RESETSEL pin. The device operates from a single +3V supply. Low power consumption and s...

• 2022-09-23 11:55:58

General Instructions . In essence, this part can mainly operate Mode A and B in alternate configurations – Mode A provides switch controller to generate 5Vdl from ATX power supply, linear controller – str1 (2.5Vdual) and bus terminator controller – 1.25 Vdual , for high-speed buses such as RDRAM/DDRAM current sinks and sources; Mode B offers to design a switch controll...