News

  • 2022-09-23 11:26:54
VND810MSP dual-channel high-side driver

DESCRIPTION The VND810MSP is a monolithic device designed with STMicroelectronics ViPower M0-3 technology to drive any type of load with one side grounded. Active VCC pin voltage clamp protects device from low energy peaks (see ISO7637 Transient Compatibility Table) Active current limit combined with thermal shutdown and auto-restart protects the device against o...

Read more
  • 2022-09-23 11:26:54
VND670SP Dual High Side Switches with Dual Power ...

Description The Vnd670SP is a monolithic device fabricated with STMicroelectronics ViPower technology M0-3 for driving a full-bridge motor configuration. The device integrates two 30mΩ power mosfets in a high-side structure and provides two external MOSFETs that act as low-side switches. The power mosfet provides the gate drive. INA and INB allow selection of clockwise or...

Read more
  • 2022-09-23 11:26:54
AD625 is a precision instrumentation amplifier

feature User programmable gain 1 to 10000 ; low gain error: 0.02% max; low gain tc: 5ppm/c (max); low nonlinearity: 0.001% max; low offset voltage: 25 V; low noise 4nv/Hz (1khz ) RTI√; Gain Bandwidth Product: 25 MHz; 16-lead ceramic or plastic dipping package,; 20-terminal LCC package; standard military drawings available; MLL standard parts available; low cost. Product Descrip...

Read more
  • 2022-09-23 11:26:54
Fan 5234 Mobile Friendly PWM/PFM Controller

Features: Wide input voltage range (2 to 24 volts) for mobile systems Superior dynamic response and voltage feedforward Average current mode control Low-side mosfet or precision overcurrent using sense resistor VCC Undervoltage lockout mode maximizes efficiency QSOP16, TSSOP16 300kHz or 600kHz operation Application: Mobile PC Regulator Handheld Computer Power Supply G...

Read more
  • 2022-09-23 11:26:54
ML2281, ML2282*, ML2284#, ML2288# Serial I/O 8-bi...

feature Conversion time: 6 microseconds; total unadjusted error: ±1/2LSB or ±1LSB; sample and hold: 375ns acquisition; 2, 4 or 8 input multiplexer options; 0 to 5V analog input range, single 5V; Power supply; scaled operation or up to 5V; voltage reference; no zero or full scale required; ML2281 capable of digitizing 5V, 40kHz sine waves; low power: 12.5mW max; advanced pin-compa...

Read more
  • 2022-09-23 11:26:54
Fan 2514, Fan 2515, 200mA CMOS LDO regulator to en...

Features: Ultra Low Power Support Optimized for CDMA Time Periods 200mA at 200mV Voltage Drop at 200mA 75μA Ground Current Enable/Disable Control SOT33-5 Package Thermal Limit 300mA Peak Current Applications: Cell Phones and Accessories PDA Camcorders and Video Recorders Notebooks, Notebooks and Palmtops Description: The fan2514/15 micropower low dro...

Read more
  • 2022-09-23 11:26:54
VNQ810-E four-channel high-side driver

Description VNQ810-E is a quad HSD formed by assembling two VND810-E chips in the same SO28 package. The VNQ810-E is a monolithic device made with STMicroelectronics Vipower M0-3 technology to drive a load child that is grounded on either side. Active VCC pin voltage clamp protects the device from low energy peaks wrapping active current limiting combined with thermal s...

Read more
  • 2022-09-23 11:26:54
UC3902 Load Sharing Controller

The UC3902 Load Sharing Controller is an 8-pin device used to balance the current drawn from independent parallel power supplies. Load sharing is achieved by adjusting the output current of each power supply to a level proportional to the voltage on the shared bus. The main supply is automatically designated as the supply regulated to the highest voltage, driving the shared bus at a voltag...

Read more
  • 2022-09-23 11:26:54
The AAT3155 is a low noise, constant frequency charge pu...

feature Voltage Range: 2.7V to 5.5V at; fully programmable single wire current; 16 current levels; four low current settings down to 50 microamps; low I (50 microamps) in low current mode; three modes 1x, 1.5x, 2x maximum charge pump efficiency and V coverage Type F; drives up to four LED channels; no inductor, low noise operation; 1MHz constant switching frequency; small application ...

Read more
  • 2022-09-23 11:23:50
AD5200/AD5201 are 256-bit and 33-bit digital potentiomet...

feature AD5200-256 -position; AD5201-33-position; 10 km, 50 km; 3-wire SPI compatible serial data input; single supply 2.7 V to 5.5 V or dual 2.7 V supply for AC or bipolar operation; midscale built-in power supply. application Replacement of mechanical potentiometers; instrumentation: gain, offset adjustment; programmable voltage to current conversion; programmable filters, delays, t...

Read more
  • 2022-09-23 11:23:50
FM24C04B 4-Kbit (512-x8) series (I2C) F-RAM

Features: Logically 4-Kbit Ferroelectric Random Access Memory (F-RAM) organized by 512 × 8 High Endurance 100 Trillion (1014) Read/Write 151 Year Data Retention Period (see Data Retention and Endurance Table) NoDelay 8482 ; Direct hardware replacement for writing to advanced high reliability ferroelectric process Fast 2-wire serial interface (I2C) serial (I2C) EE...

Read more