• 2022-09-23 10:24:11

feature Low power, minimum pin compatible, dual nanoDAC; AD5663R : 16-bit; AD5643R: 14-bit; AD5623R: 12-bit; user selectable external or internal reference; external reference default; on-chip 1.25 V/2.5 V, 5 ppm/ °C reference; 10-lead MSOP and 3 mm × 3 mm LFCSP; 2.7 V to 5.5 V supply; power-on reset by design to zero-scale guaranteed monotonicity; power down per chann...

• 2022-09-23 10:24:11

The HIP6012 is a DC-DC converter microprocessor application optimized for high performance. It is designed to drive an N-channel mosfet topology in two synchronously rectified bucks. The HIP6012 integrates all control, output, adjustment, monitoring and protection functions into one. The output voltage of the converter can be precisely regulated down to 1.27 volts with maximum toler...

• 2022-09-23 10:24:11

Every electronic engineer must know that PCB design occupies a very important position when designing. Taking the power supply as an example, the PCB design will directly affect the EMC performance, output noise, anti-interference ability, and even basic functions of the power supply. The PCB layout of the power supply part is slightly different from other hardware, how should it be...

• 2022-09-23 10:24:11

As the density of components in electronic systems increases, designers often choose equivalent precision connectors with a coplanarity of no more than 0.10 mm to match a 0.10 mm thick solder paste stencil on a printed circuit board (PCB). . However, there are many connectors with a coplanarity value of 0.15 mm on the market, and connectors with a coplanarity value of 0.10 mm are also difficu...

• 2022-09-23 10:24:11

feature Low-Power, Four-nm Digital-to-Analog Converter; AD5664 : 16-bit; AD5624: 12-bit; Relative Accuracy: ±12 LSB Max; Monotonic by Design; 10-lead MSOP and 3 mm × 3 mm LFCSP-WD; 5.5 V power supply; power-on reset to zero; power down per channel; serial interface, up to 50 MHz. application Process Control; Data Acquisition Systems; Portable Battery-Power...

• 2022-09-23 10:24:11

feature Accurate rms-to-DC conversion from 50 Hz to 6 GHz Single-ended input dynamic range >50 dB; no balun or external input tuning required; waveform modulation independent RF power detection; linear decibel output, scale: 52 m Volts/dB; Log Consistency Error:

• 2022-09-23 10:24:11

illustrate HCPL-4504 and HCPL-0454 contain a GaAs LED while HCPL- J454 and HCNW4504 contain AlGaAs LEDs. The LED is optically coupled to an integrated high-gain photodetector. The HCPL-4504 series has short propagation delay and high centering. The HCPL-4504 series also has a difference in propagation delay (tPLH-tPHL). These features make the HCP...

• 2022-09-23 10:24:11

illustrate Available in 8-pin dip or SO-8 package types respectively, the HCPL-7710 or HCPL-0710 optocouplers utilize the latest CMOS integrated circuit technology to achieve excellent performance with extremely low power consumption. The HCPL-x710 requires only two bypass capacitors to be fully CMOS compatible. The basic building blocks of the HCPL-x710 are the CMO...

• 2022-09-23 10:23:20

ICD failure, that is, Inner connection defects, also known as inner layer interconnect defects. For PCB manufacturers, it is difficult to effectively intercept the ICD problem in the electrical measurement process, and it often flows to the downstream or even the client. During the SMT placement process, the PCB board undergoes lead-free reflow soldering IR, wave soldering, and...

• 2022-09-23 10:23:20

With the rapid development of modern electronic technology, PCBA is also developing towards high density and high reliability. Although the current level of PCB and PCBA manufacturing processes has been greatly improved, the conventional PCB solder mask process will not have a fatal impact on product manufacturability. However, for devices with very small device pin spacing, due t...

• 2022-09-23 10:23:20

feature Low Offset Voltage: 1 mV; Input Offset Drift: 0.005 mV/8C; Rail-to-Rail Input and Output Swing; 5 V/2.7 V Single Supply Operation; High Gain, Common Mode Rejection Ratio, PSRR: 130dB ; Ultra Low Input Bias Current: 20pa ; Low Supply Current: 750mA/Op Amp; Overload Recovery Time: 50ms; No External Capacitors Required. application Temperature ...