• 2022-09-23 10:02:16

SG3524P (SO16) regulates the power inverter or switching regulator. They can also be used as control elements for high power output applications. The SG3524 series is designed for switching regulators - Transformer Coupled DC Polarity - For DC converter, transformerless voltage doubler and polarity converter applications using fixed frequency, pulse width modulation techniques. D...

• 2022-09-23 10:02:16

3.5V to 28V Input Voltage Range The output voltage is adjustable down to 0.8V . The TPS54231 is a 28V, 2A non-synchronous step-down converter with integrated low RDS(on) high-side 8226 ; integrated 80 mΩ high-side MOSFET supports the MOSFET. To improve efficiency at light loads, continuous output current pulses of up to 2A™ automatically skip the Eco-Mode function...

• 2022-09-23 10:02:16

feature Fault detected on 7 separate power supplies; 1 high voltage supply (2 V to 14.4 V); 4 positive voltage supplies (2 V to 6 V); 2 positive/negative voltage supplies (+2 V to +6 V and - 2 V to -6 V); watchdog detector input timeout delay programmable from 200 ms to 12.8 seconds; 4 general purpose logic inputs; programmable logic block combination and sequencing logic controls for all...

• 2022-09-23 10:02:16

The ISL1208 device is a low power real-time clock timing and crystal compensation, clock/calendar, power failure indicator, periodic or polling alarms, intelligent battery backup switch and battery backed user SRAM. This oscillator uses an external low cost 32.768kHz crystal. The real-time clock keeps track of hours, minutes, and seconds in separate registers. The device has a calendar...

• 2022-09-23 10:02:16

feature 10-bit and 12-bit ADCs with fast conversion times: 2 μs typical; 8 single-ended analog input channels; specified VDD from 2.7 V to 5.5 V; low power consumption; fast throughput: up to 188 kSPS; sequencer operation; Auto Loop Mode; I2C® Compatible Serial Interface Supports Standard, Fast and High Speed Modes; Out of Range Indicator/Alarm Function; Pin-Selec...

• 2022-09-23 10:02:16

feature DESCRIPTION ISO1540 and ISO1541 devices are low-power, 1-isolated bidirectional, I2C compatible, bidirectional isolators compatible with the I2C communication interface. These devices have their logic inputs and output buffers that support up to 1 MHz of operation, separated by TI's capacitive isolation technology for the 3-V to 5.5-V power supply range usin...

• 2022-09-23 10:02:16

describe The TPS2211A PC Card Power Interface Switch provides an integrated power management solution for a single PC Card. All discrete power mosfets, logic sections, current limiting and PC card controlled thermal protection are combined on a single integrated circuit using Texas Instruments LinBiCMOS process. 12-V card power supply, compatible with many PCMCIA ...

• 2022-09-23 10:02:16

TPS6300x High Efficiency Single Inductor 1.8A Switching Buck-Boost Converters Features Input Voltage Range: 1.8 V to 5.5 V Fixed and Adjustable Output Voltage Options 1.2V to 5.5V Efficiency up to 96% 1200 mA output current at 3.3 V in buck mode (VIN = 3.6 V to 5.5 V) Up to 800 mA output current at 3.3 V in boost mode (VIN > 2.4 V) Automatic transition betw...

• 2022-09-23 10:02:16

feature 80 MSPS guaranteed sample rate; 100 dB dual-tone SFDR, 69.3 MHz and 70.3 MHz; 73.1 dB SNR, 70 MHz input; 97 dBc SFDR, 70 MHz input; good linearity; DNL=±0.4 LSB typical; INL =±0.6 LSB typical; 1.2W power consumption; 3.3 V and 5 V supply operation; 2.0V pp differential full-scale input; LVDS output (ANSI-644 compliant); data format select...

• 2022-09-23 10:02:16

feature 69.6 dBFS SNR at 185dBFS and 250ms/sec; SFDR=86dBc - 149.9dBFS/Hz input noise at 185MHz fIN and 250ms/sec, 185MHz, -1dBFS AIN and 250ms/sec seconds; total power consumption: 770 mW at 250 MSPS; 1.8V supply voltage; LVDS (ANSI-644 grade) output; integer 1 to 8 input clock divider (maximum input 625 MHz); sample rates up to 250 MSPS; IF Sa...

• 2022-09-23 10:02:16

The Intersil ISL54050 device's low on-resistance bidirectional dual SPDT voltage analog switches are designed to operate from a single +1.65V to +4.5V supply. Target applications include battery powered from low rON (0.29Ω) and fast switching speed (tON=40ns, tOFF=20ns). Digital Logic Inputs are compatible with 1.8V logic when using a single +3V supply. For example, m...