• 2022-09-23 11:19:13

Features: Provides auxiliary switch activation Complementary to main power switch driver: Programmable dead time (turn-on delay) between each switch activation. Voltage Mode Control with Feedforward Operation: Transformer Volts-Second Product and Programmable Limits for PWM Duty Cycle. Auxiliary Outputs: Multiple Protections with Latching Shutdown and Soft Start Featur...

• 2022-09-23 11:19:13

illustrate The WM9705 is a high-quality stereo audio codec with an integrated touchscreen controller. The audio part complies with the Intel AC'97 version 2.2 specification. It performs full-duplex 18-bit codec functions, supports variable sampling rates from 8 to 48k samples/sec, and has a high signal-to-noise ratio. Optional AC 97 features include 3D sound enhancement, line level...

• 2022-09-23 11:19:13

feature Dual symmetric 600 MHz high-performance Blackfin cores 328K bytes of on-chip memory; each Blackfin core includes two 16-bit macs, two 40-bit alus, four 8-bit video alus, 40-bit shifters RISC-like registers and instruction model , easy programming and compiler friendly support for advanced debugging, tracing and performance monitoring Wide operating voltage range; 256 -ball CSP...

• 2022-09-23 11:19:13

feature Accuracy 1. 200 V voltage reference; ultra-compact 3 mm × 3 mm SOT-23 package without external capacitors; low output noise: 4 microvolts pp (0.1 Hz to 10 Hz); initial accuracy: ±0.3% max; temperature Coefficient: 60 ppm/°C max; Operating Current Range: 100µA to 10mA; Output Impedance: 0.3Ω max; Temperature Range: -40°C to +85°C. application Precision data acqui...

• 2022-09-23 11:19:13

feature Industry Standard Pinout 4.5-V to 18-V Operating Range 3-A Peak Sink/Source at VDD=12 V; 2.4 A Peak Sink/1.6-A Source at VOUT=6 V; TTL or CMOS Input Threshold Choose from four versions of dual independent drivers: - Dual Inverted + Enable ( FAN3226 ) - Dual Non-Inverted + Enable (FAN3227) - Dual Input in Two o Pin-Out Configurations: o ...

• 2022-09-23 11:19:13

feature Parallel LED driver supports all forward voltages Adaptive VOUT adjustment to highest diode voltage Internally matched LED current source No external components required to set LED current Built-in charge pump has three modes of operation: – Linear regulation VIN > 4.2V – 3 /2 DC-DC converter and regulated 3.6V

• 2022-09-23 11:19:13

Features DAC/Voltage Monitor and PWM Combo with Synchronous Rectification 5 digital to analog converters 1% DAC/Reference Combo Accuracy Compatible with 5V and 12V Systems and 12V Only Low Offset Current Sense Amplifier Programmable Oscillator Frequency for 700kHz Folded Current-Limited Overvoltage and Undervoltage Fault Windows 2Ω Totem Pole Output with...

• 2022-09-23 11:19:13

feature Low Noise: 0.2 MV PP 0.1 Hz to 10 Hz; Low Gain TC: 5 ppm max; Low Nonlinearity: 0.001%Max (=G= 1-200 ); High CMRR: 130 DB min ((G= 500 to 1000 ); low input offset voltage: 25mW, maximum input offset voltage; low input offset voltage drive: 0.25mv//8c maximum input offset voltage drive; gain bandwidth product: 25MHz; PIN programmable gain 1, 100, 200, 500, 1000...

• 2022-09-23 11:19:13

describe The UCCx817/18 family provides all the functions required for an active power factor correction preconditioner. By shaping the AC input line current waveform to make it correspond to the AC input line voltage waveform, the controller achieves the goal of approaching unity power factor. Average current mode control maintains stable, low distortion string current. UCC2817/UCC...

• 2022-09-23 11:19:13

feature Drives N-channel high-side and low-side mosfet synchronous buck configuration 12V high-side and 12V low-side drivers Internal adaptive "shoot-through" protection Integrated bootstrap diodes for high-side drive Fast rise and fall times Switching frequency up to 500kHz Output disabled OD Input - Allows Synchronous Band PWM Controller SOIC-8 Package Available in Low...

• 2022-09-23 11:19:13

feature Single-chip solution with internal oscillator and voltage reference; no adjustment required; insensitive to sensor zero voltage; insensitive to primary to secondary phase shifts; DC output proportional to position; 20 Hz to 20 kHz frequency range; single Mains or dual supply operation; monopolar or bipolar output; will operate a remote LVDT at altitudes of 300 feet; position outp...