Features Lead-Free Products RoHS Compliant SMD LEDs with Superior Brightness Luminous Intensity Category E3 Compatible with Auto Placement Devices EIA and ICE Standard Package Compatible with IR, Gas Phase, Wave per CECC 00802 and J-STD-020B Type 8mm Tape Thin Package 94 8553 Non-Diffusing Lenses: Ideal for Coupling with Light Ducts and Ba...
Read more
HIP6004E is a step-down synchronous rectification PWM controller and output voltage supervisor. HIP6004E integrates PWM control, output voltage regulation, voltage monitoring and overvoltage, in a very small package (SOIC-20 or TSSOP-20). With functions such as overcurrent protection, the output voltage can be precisely adjusted in increments of 25mV within the range of D...
Read more
The BTS621L1 is a high-side power switch with integrated vertical power FETs that provide embedded protection and diagnostics. N-Channel Vertical Power FET with Charge Pump, Ground Referenced CMOS Compatible Input and Diagnostic Feedback, Monolithic SmartSAPMOS Technology. Provides embedded protection. feature Overload protection current restrictions Short ci...
Read more
1 Function description The VCA5807 is an integrated voltage-controlled 8-channel voltage-controlled amplifier designed specifically for ultrasound (VCA) – a programmable low noise amplifier (LNA) required for high performance, small form factor LNA, VCAT, PGA, LPF and CW mixing systems. The VCA5807 integrates a complete –24/18/12 dB gain time gain control (TGC) ...
Read more
The CDC351 is a high performance clock driver circuit that distributes one input (A) to ten outputs (Y), minimizing clock distribution skew. The output enable (OE) input disables the output from entering a high impedance state. The CDC351 operates on a constant 3.3V VCC. Propagation delay is rounded up when using P0 and P1 pins. thefactoryadjustment ensures that part-to-part sk...
Read more
The DS1631 , DS1631A, and DS1731 digital thermometers provide 9-, 10-, 11-, or 12-digit temperature readings over the entire -55°C to + 125 °C range. The DS1631 and DS1631A thermometers have an accuracy of ±0.5°C over the 0°C to +70°C range with a power supply of 3.0V ≤ VDD ≤ 5.5V. The DS1731, on the other hand, has ±1°C accuracy over the -10°C to +85°C ra...
Read more
Source Loop Controller Characterization Provides control for flyback based the UCC3750 source ringer controller provides a complete control and four-quadrant amplifier topology driving solution for a four-quadrant feedback loop generator circuit. Tea Onboard sine wave reference with low cost is where it goes from input to output. IT also controls the switching power flow of the primary...
Read more
The EL2227 is a dual low noise amplifier ideal for line reception applications in ADSL and HDSLII designs. The low noise specification of the EL2227 is only 1.9nv/hz and 1.2pa/hz, making it ideal for detecting very low amplitude signals. The EL2227 features a -3dB bandwidth of 115MHz with a gain of 2 stability. The EL2227 also offers minimal power dissipation, drawing only...
Read more
CAT803 , CAT809 and CAT810 are supervisory circuits that monitor power supplies in digital systems. The CAT803, CAT809 and CAT810 are drop-in replacements for the MAX803 , MAX809 and MAX803 and the MAX810 is suitable for applications in the industrial temperature range. These devices generate a reset signal that is asserted when asserted when the supply voltage fall...
Read more
The AD9200 is a single-chip, single-supply, 10-bit, 20 MSPS analog-to-digital converter amplifier and voltage reference with on-chip sample-and-hold. The AD9200 uses a multi-stage differential pipeline architecture, 20 MSPS data rate and guaranteed no missing code range over the entire operating temperature. The inputs to the AD9200 are designed to simplify the development of imag...
Read more
The HIP6006 provides complete control and protection of a DC-DC converter optimized for high performance microprocessor applications. It is designed to drive two N-channel MOSFETs in a synchronous rectified buck topology. The HIP6006 integrates all control, output adjustment, monitoring and protection functions into a single package. The converter's output voltage can be p...
Read more